SOB Manual

MNSOB Shut Off Box Instructions (continued)
2 | P a g e 1 0 - 283- 1 R E V : P 5
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS - These instructions contain important safety and operating instructions for the
MidNite Solar MNSOB Shut Off Boxes.
If you do not fully understand any of the concepts, terminology, or hazards outlined in these instructions, please refer
installation to a qualified dealer, electrician or installer. These instructions are not meant to be a complete explanation of a
renewable energy system.
GENERAL PRECAUTIONS
If service or repair should become necessary, contact MidNite Solar Inc. Improper servicing may result in a risk of shock, fire
or explosion. To reduce these risks, disconnect all wiring before attempting any maintenance or cleaning. Turning off the
inverter will not reduce these risks. Solar modules produce power when exposed to light. When it is not possible to
disconnect the power coming from the Photovoltaics by an external means such as a combiner, cover the modules with an
opaque material before servicing any connected equipment.
Do not work alone. Someone should be in the range of your voice or close enough to come to your aid when you work with
or near electrical equipment.
Remove rings, bracelets, necklaces, watches etc. when working with photovoltaic modules or other electrical equipment.
Power from an illuminated photovoltaic array makes a very effective arc welder with dire consequences if one of the welded
pieces is on your person.
INSTRUCTIONS DE SECURITÉ IMPORTANTES
CONSERVER CES INSTRUCTIONS
Ces instructions contiennent des informations importantes pour utiliser le Midnite Solar MNSOB
boîtes de déconnexion rapide en toute sécurité.
1. Avant l’utilisez cet appareil lis et comprends toutes les instructions et avertissements.
2. Si vous ne comprenez pas l’une des concepts ou des instructions contenu dans cette manuel
consulter un agent spécialisé.
3. Si des réparations sont nécessaires contactez MidNite Solar pour plus des informations. Danger de
choc électrique et de risque de brulure. Rien à dépanner à l'intérieure du cette appareil. Ne pas
ouvrir le couver. Pour toute réparation ou service d'entretien, consulter un agent spécialisé. Il y’a
peut-être plusieurs sources d’alimentation dans cette system. Débrancher toutes les interrupteurs
avant toute d'entretien où nettoyage.
4. Ne travaillez pas seul. Quelqu'un devrait toujours être à proximité pour aider en cas d'une
situation d'urgence.
5. Retirer bagues, bracelets, colliers, montres, et quelles choses comme ça. Il y’a risque des blessures
graves s’il y’a un court-circuit. Cela pourrait ruiner votre journée entière.
6. Le câblage doit être fait en conformité avec le National Electrical Code ANSI / NFPA 70. Utiliser des
méthodes de câblage de catégorie 1 pour les connexions de câblage sur .des terminaux d'un circuit de
classe 2. Utilisez uniquement des fils de AWM de calibre 14-1/0. Sélectionnez le type de câble utilisé
sur la base de la protection prévue par les disjoncteurs / fusibles.