SDS
GHS SAFETY DATA SHEET
CONCRETE
8.2 Exposure controls:
Use adequate ventilation to keep exposures below recommended exposure limits.
8.3 General protective and hygienic measures:
Keep away from foodstus, beverages, and feed. Immediately remove all soiled and contaminated clothing. Wash
hands before breaks and at the end of work. Avoid contact with the eyes and skin.
8.3a Personal protective equipment:
Protection for hands: Wear gloves of adequate length to oer appropriate skin protection from incidental
contact. General work duty gloves have been found to odder adequate protection for most intended uses.
Eye protection: Wear approved eye protection (properly tted dust-proof chemical safety glasses).
Respiratory protection: A NIOSH-approved dust mask or ltering face piece is recommended in poorly
ventilated areas or when permissible exposure limits may be exceeded. Respirators should be selected by and
used under the direction of a trained health and safety professional, following requirements found in OSHA’s
respirator standard (29 CFR 1910.134) and ANSI’s standard for respiratory protection (Z88.2).
SECTION IX: PHYSICAL/CHEMICAL CHARACTERISTICS
General Information
Appearance
pH-value at 20°C (68°F):
Boiling point/boiling range:
Flash point:
Auto igniting:
Vapor pressure at 21°C (70°F):
Density at 25°C (77°F):
Solubility in/Miscibility with
Water :
VOC content:
Form: Fully cured hydrated concrete
Color: Varies
Odor: None
Not applicable
Not applicable
Not applicable
Product not self-igniting
Not available
Not applicable
Insoluble
0 g/L VOC
5