Installation Instructions

98
Air Button Control-Whirlpool or
Optional Combo
With our pneumatic controls, you can select your bathtub’s
pump with one finger.
Star Jet
Allows user to adjust the direction pressure, by timing clock
wise open flow, counter clockwise close flow.
Safety Suction
Inlet that allows water to return to pump (standard on all
models). If suction is blocked, the pump will automatically
shutdown.
Air Controls
Allows user to adjust the pressure from the jets.
Builders Jet
Constant flowing jet without on/off flow.
Air Control/Turbo Boost™
The air control allows inducement of air into water stream
(increasing or decreasing Jet pressure).
The blower system is turbo charged into the water jets
resulting in increase power. Turbo boost exist only if the
blower system is on, and providing the air control is in the
open position.
H.E.E.T.
Maintains water temperature without a heater using kinetic
energy of the water pump.
Touch Pad
This 3-in-1 switch allows the user to turn the pump on
and off. It has a 15 minute timer, and an automatic low
water sensor that shuts down the pump in a low water
level condition.
Aromatherapy
All tubs with a blower system include MidWest Tubs Air
Tub’s exclusive aroma therapy system standard. Open the
aroma canister, drop in your favorite fragrance - turn on the
blower system and you will experience an immediate sense
of aromatic bliss.
Chromatherapy
Specially designed underwater LED lights will enhance
your mood upon illumination.
E-Z Clean
Simple but effective, offering you complete peace of
mind. Simply dilute a small amount of water with any
household antibacterial cleaning agent, drop it into the
fragrance dispenser, activate the pump and your tub is
cleaned and sanitized. Also purge cycle at 30 minutes
after tub is use, another every 24 hours.
Standard with Air Tub.
O
3
OZone
An O3 ozonator is an automatic device that produces
ozone to safely and effectively sanitize your bath while in
use. Available on whirlpool and combination systems.
O
p
e
n
C
l
o
s
e
INSTALLATION CONTINUEDINSTALLATION CONTINUED