H.
H.264 Network Digital Video Recorder User Manual Welcome Thank you for purchasing our DVR! This manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series DVR features and functions, as well as a detailed menu tree. Before installation and operation please read the following safeguards and warnings carefully! Important Safeguards and Warnings Do not place the heavy object on the DVR.
H.264 Network Digital Video Recorder User Manual Contents 1. Production Introduction .......................................................................................................................................... 5 1.1 Product overview .................................................................................................................................................. 5 1.2 Main functions ................................................................................................
H.264 Network Digital Video Recorder User Manual 4.5 HDD manage ...................................................................................................................................................... 32 4.6 Network setup ..................................................................................................................................................... 33 4.7 PTZ config ...........................................................................................................
H.264 Network Digital Video Recorder User Manual 1. Production Introduction 1.1 Product overview The series DVR is designed specially for security and defence field which is an outstanding digital surveillance product. It introduces embedded LINUX operating system which is more stable. It introduces standard H.264mp video compressed format and G.711A audio compressed format which insures the high quality image, low error coding ratio and single frame playing.
H.
H.264 Network Digital Video Recorder User Manual The label in the real panel is very important for the after service. Please protect it carefully. When you contact us for after service, please provide the product type and serial number in the label. (2). After open the case should be checked In addition to checking whether there are obvious signs of external damage, please note that before the inspection panel data lines, power lines and motherboard connection is loose. 2.
H.264 Network Digital Video Recorder User Manual 2.3 Front panel 2.3 Back panel 2.5 Installation connections sketch map (Below just as the 4CH DVR for example,Specifically please refer to practical product.) ~ 2.6 Audio and video input and output connections 2.6.1 Video input connections The video input port is BNC connector plug. The demand of input signal is PAL/NTSC BNC(1.0VP-P,75Ω).
H.264 Network Digital Video Recorder User Manual Insure the transmission line stable and credible The video transmission line should adopt high quality coaxial pair which is chosen by the transmission distance. If the transmission distance is too far, it should adopt shielded twisted pair, video compensation equipment and transmit by fiber to insure the signal quality. The video signal line should be away from the electro magnetic Interference and other equipments signal lines.
H.264 Network Digital Video Recorder User Manual methods to deal with the above phenomena. 1 Adopt better directional tone arm. 2 Adjust the sound box volume to be under the threshold that produces the howling phenomena. 3 Use fitment materials that absorb the sound to reduce reflection of the sound. 4 Adjust the layout of the sound box and the tone arm. 2.7 Alarm input and output connections(Some models no such function,please prevail in kind.) Alarm input A. Alarm input is grounding alarm input.
H.264 Network Digital Video Recorder User Manual 2.7.1 Alarm input port specification This feature should be used in conjunction and external alarm module, some models have an external alarm module for optional. 4 channels alarm input. Alarm input type unlimited. The grounding and the com port of the alarm sensor are parallel (The alarm sensor is external power supply) . The grounding of the alarm and the DVR should be shared. The NC port of the alarm sensor must be connected with the DVR alarm input port.
H.264 Network Digital Video Recorder User Manual 2.8 Speed dome connections 1 Connect the 485 lines of the speed dome with the DVR 485 interface. ~ 2 Connect the video line with the DVR video input. 3 Electrify the speed dome. 3. Basic operation 3.1 Turn on Plug the power supply and turn on the power supply switch. Power supply indicator light shining indicates turning on the video recorder. After the startup you will hear a beep. The default setting of video output is multiple-window output mode.
H.264 Network Digital Video Recorder User Manual If the DVR is shut down abnormally, it can automatically backup video and resume previous working status after power failure. 2 Replace the hard disk Before replacing the hard disk, the power supply switch in the real panel must be turned off. 3 Replace the battery Before replacing the battery, the setting information must be saved and the power supply switch in the real panel must be turned off. The DVR uses button battery.
H.264 Network Digital Video Recorder User Manual 3.4 Preview You can right click mouse to choose the switch between the windows. The system date, time and channel name are shown in each viewing window. The surveillance video and the alarm status are shown in each window. 1 Recording status 3 Video loss 2 Motion detect 4 Camera lock List 3.1 Preview icon 3.5 Desktop shortcut menu In preview mode you can right click mouse to get a desktop shortcut menu.
H.264 Network Digital Video Recorder User Manual Picture3.3 recording control interface Timing Record according to the configuration. Manual Click the all button and the according channel is recording no matter the channel in any state. Stop Click the stop button and the according channel stops recording no matter the channel in any state. 3.5.2 Video playback Play the video files in the hard disk. Note: The hard disk that saves the video files must be set as read-write or read-only state.
H.264 Network Digital Video Recorder User Manual file information Look up the found file information. file backup option Choose the file to backup . file backup Backup the chosen file. Click the button,and Pop Picture 3.5,operate as follow instruction. Note: Before the file backup,must be installed a enough storage device; If the backup is terminated, the already backup can playback individually. Picture 3.
H.264 Network Digital Video Recorder User Manual Picture 3.6 recording backup Remove Clear the file information. Add Show the file information satisfying the set file attributes. Start/Pause Click the play button to start the backup and click the pause button to stop the backup. Cancel During backup you can exit the page layout to carry out other functions. Note: During backup, may withdraw from the page to perform other functions file searching Search the file according to the searching parameter.
H.264 Network Digital Video Recorder User Manual Special Functions: Accurate playback Input time (h/m/s) in the time column and then click play button. The system can operate accurate playback according to the searching time. Local zoom When the system is in single-window full-screen playback mode, you can drag your mouse in the screen to select a section and then left click mouse to realize local zoom. You can right click mouse to exit. 3.5.3 PTZ control Operation interface is as followed.
H.264 Network Digital Video Recorder User Manual Page Switch Switch between different windows. Special Functions: 1 Preset Set a location for the preset, calls the preset points, PTZ automatically turns to the setting position 1 Preset option Set a location for the preset, procedure is as follows: Step1: in Picture 3.8, click the Direction button will turn into preset position,click the Settings button to enter Picture 3.9.
H.264 Network Digital Video Recorder User Manual Picture 3.10 PTZ Control 2 Cruise between Points Multiple preset points connected cruise lines, call cruise between points, the PTZ run around on the line 1 Cruise Between Points Settings Cruise lines is connected by multiple preset points, setting procedure is as follows: Step1: In Picture 3.8, the Direction key will turn PTZ to designated location , click Settings button to enter Picture 3.
H.264 Network Digital Video Recorder User Manual Step3 Click Start button, enter Picture 3.8 here you can set the following items: Zoom Aperture Focus Direction and so on. Click Setup button to go back Picture 3.12 Step4 Click End button to complete setup Click the right button of the mouse to exit. Scan value blank Scan Button Picture 3.12 Scan Setup 2 Scan Calls In Picture 3.8, click Page Shift button, then enter PTZ control menu as shown in Picture 3.10.
H.264 Network Digital Video Recorder User Manual Left and right Scan setup button Boundary Scan button Picture 3.13 Boundary Scan Setup 2 Boundary Scan Calls In Picture 3.8, click Page Shift button, then enter PTZ control menu as shown in Picture 3.10. Please input the number of scan in the value blank , then click Scan button PTZ begins to work on the scan line . Click Stop button to stop.
H.264 Network Digital Video Recorder User Manual Picture 3.14 Auxiliary Function Control Intuitive Auxiliary Operation choose auxiliary equipment, select Open or Close button, switch control Auxiliary Number The operation of corresponding auxiliary switch according to PTZ agreement Page Shift In Picture 3.14 click Page Shift button enter the Picture 3.8 PTZ Main Menu , the menu itself can be control by the menu control buttons 3.5.
H.264 Network Digital Video Recorder User Manual 3.5.6 Window switch Preview in single window/four windows/eight windows/nine windows according to the choice. 3.5.7 System information System Information menu items include: Hard Disk information, Log information, Stream Statistics, Online Users, and Version information. 3.5.7.1 Hard Disk information Display the hard disk state: hard disk type, overall capability, residual capability, the recording time and so on. Picture 3.
H.264 Network Digital Video Recorder User Manual button to look up and press delete button to clear all the log information. Picture 3.18 log information 3.5.7.3 Code stream statistics Display the code stream Kb/S and hard disk capability MB/H in real time. It displays as the wave sketch map. Picture 3.19 code stream statistics 3.5.7.4 Online user Look up the network user information in the local DVR. You can choose the network user and cut the connection.
H.264 Network Digital Video Recorder User Manual Picture 3.20 online user 3.5.7.5 Edition information Display the basic information such as hardware information, software edition, issue data and so on. Picture 3.21 edition information 3.5.8 Logout Logout, shut down the system or reboot up. You can use the desktop shortcut menu or enter [main menu].
H.264 Network Digital Video Recorder User Manual Picture 3.22 shut down the system Logout Quit the menu. Offer password next entrance. Shutdown Quit the system. Turn off the power supply. When press the shut down button, there is schedule hint. After three seconds, the system is shut down. Cancel midway is of no effect. Reboot Quit the system. Reboot up the system..
H.264 Network Digital Video Recorder User Manual 4. Main Menu When User login, the system main menu is shown as below. Picture4.0 Main menu 4.
H.
H.264 Network Digital Video Recorder User Manual The concrete operation,please refer to the chapter of "3.5.1 Record Mode." 4.3 Record Config Set the recording parameters in the surveillance channel. The system is set 24 hours consecutive recording in the first startup. You can enter [main menu]> [recording config] to set. Note There is at least one read-write hard disk. Detail operation please refer to chapter 4.5 HDD manage Picture 4.
H.264 Network Digital Video Recorder User Manual set as opening recording, the “detection recording” state is on. The video file type is “M”. alarm Trigger the external alarm signal in the set time section. When above alarm is set as opening recording, the “detection recording” state is on. The video file type is “A”. Note Refer to chapter 4.8 to set corresponding alarm function. 4.4 Encode setup Set the video/audio code parameter: video file, network surveillance and so on. Picture 4.
H.264 Network Digital Video Recorder User Manual Resolution, frame rate, stream control, code stream value parameters and the independent channel the same settings. 4.5 HDD manage Configure and manage the hard disk. The menu displays current hard disk information: hard disk number, input port, type, status and overall capability. The operation include: setup the write-read disk, read-only disk, redundant disk, hard disk format, resume default.
H.264 Network Digital Video Recorder User Manual 4.6 Network setup Picture4.4 network setup network card You can choose cable network card or wireless network card. DHCP Enable Obtain IP address automatically. Note DHCP server is preinstalled. IP address Set the IP address. Default: 192.168.1.10. Subnet mask code Set the subnet mask code. Default: 255.255.255.0. Gateway Set the default gateway. Default: 192.168.1.1. DNS setup Domain Name Server. It translates the domain name into IP address.
H.264 Network Digital Video Recorder User Manual service parameter configuration items. Picture 4.5 network service PPPoE setup Picture4.6 PPPOE setup Input the user name and password that ISP Internet service provider provides. After saving it reboot up your system. Then the DVR will build a network connection based on PPPoE. The IP address will change into dynamic IP address after above operation is well done.
H.264 Network Digital Video Recorder User Manual Host computer IP Input the IP address installed NTP server. Port Default: 123. You can set the port according to NTP server.
H.264 Network Digital Video Recorder User Manual When choosing the white list, only the listed IP address can connect the DVR. The 64 IP addressed are supportive in the list. When choosing the black list, the listed IP address can not connect the DVR. The 64 IP addressed are supportive in the list. You can delete the set IP address by √ in the options. Note When the same IP address is in the white and black list at the same time, the black list precedence is higher. Picture 4.
H.264 Network Digital Video Recorder User Manual Picture 4.10 DDNS setup FTP FTP used when there get alarm,or alarm linkage to recording,snap pictures, you can specify the FTP server to upload video and capture specific images. Picture 4.11 FTP setup Enable Select ■,enable the FTP function. Server IP FTP server's IP address Port FTP set up the domain when the port number, default port 21. User name Permission to log FTP user name. Password User’s password.
H.264 Network Digital Video Recorder User Manual Dial-up Internet access through 3G card to realize the client access device, the device configuration (Note: only for some models) Picture 4.12 Wireless config setup Enable Select ■,enable the Wireless function. Type Dial type, the default auto. Wireless AP 3G access point,the default OK. Dial Number 3G dial-up number,the default OK User Name Dial-up of 3G User Name. Password Dial-up user's password. IP Address Dial-up IP address number obtained.
H.264 Network Digital Video Recorder User Manual Port Port for mobilephone view, need mapping the port on Router. UPNP UPNP protocol will be automatic port forwarding on the Router,before use this feature,make sure UPNP feature is enabled on the router. Picture 4.14 UPNP setup Enable Select ■,enable the Mobilephone function. HTTP Port Router automatically assigns the device port number, while browsing by IE, need add the port number.
H.264 Network Digital Video Recorder User Manual 4.7 PTZ config Picture 4.15 PTZ setup channel Choose the dome camera input channel. protocol Choose the corresponding dome protocol. (PELCOD as an example) address Set as the corresponding dome address. Default: 1. Note The address must be consistent with the dome address. baud rate Choose the corresponding dome baud rate length. You can control the PTZ and camera. Default: 115200. date bit Include 5-8 options. Default: 8. stop bit Include 2 options.
H.264 Network Digital Video Recorder User Manual Picture 4.16 motion detect channel number Choose the set motion detect channel. enable ■ means that the motion detect function is on. sensitivity Choose in the six options according to the sensitivity. area Click setup and enter the set area. The area is divided into PAL22X18. Green block means the current cursor area. Yellow block means the dynamic detect defensive area. Black block means the unfenced area.
H.264 Network Digital Video Recorder User Manual Picture 4.18 set the time section interval Only one alarm signal is turned on even there are several motion detect signals in the set interval. alarm output Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on. delay Delay a few moments and stop when the alarm state is turned off. The range is 10~300 seconds. recording channel Choose the recording channel (multiple option supportive).
H.264 Network Digital Video Recorder User Manual EMAIL ■ means sending an email to user when the alarm is turned on. Note Set in the network service and send an email. Beep Alarm occurs, the equipment issue "Didi" the sounds of two long ring. FTP upload Alarm occurred while sending alarm events to the FTP server. 4.8.
H.264 Network Digital Video Recorder User Manual Picture 4.21 video loss Set method: refer to Chapter 4.8.1. Motion Detect 4.8.4 Alarm input When the equipment obtains the external alarm signal, the alarm function is turned on. Notice: Advanced same the right mouse button Picture 4.22 alarm input Set method: refer to Chapter 4.8.1. Motion Detect 4.8.5 Alarm output Please check current channel status: means it is not in alarming status, alarming status.
H.264 Network Digital Video Recorder User Manual You can use desktop shortcut menu or click [main menu]> [alarm function]> [alarm output] to enter the alarm output screen. Picture 4.23 alarm output configuration Alarm is on according to the configuration. All Click the all button and the according channel is alarming no matter the channel in any state. stop Click the stop button and the according channel stops alarming no matter the channel in any state. 4.
H.264 Network Digital Video Recorder User Manual time format Choose time format: 24-hour or 12-hour. language English or Chinese. hard disk full Choose stop: Stop recording when the hard disk is full. Choose cover: Cover the earliest recording files and continue recording when the hard disk is full. number Only when the address button in the remote controller and the corresponding DVR number is matched, the remote operation is valid. video format PAL or NTSC. latency time Set the latency time in 0-60.
H.264 Network Digital Video Recorder User Manual recording status, alarm status, code stream information, transparency and cover area. Picture 4.27 GUI display channel name Click the channel name modify button and enter the channel name menu. Modify the channel name. The 16 Chinese characters and 25 letters are supportive. time title ■ means the selective state. Display the system data and time in the surveillance window. channel title ■ means the selective state.
H.264 Network Digital Video Recorder User Manual Picture 4.28 Tour setup interval Set the patrol switch interval. The set range is 5-120 seconds. Note At the preview mode, / means turn off/on the patrol. 4.9.3 Account management Manage the user purview. Note 1. The char length is 8 bytes at most for the following user and user team name. The blank ahead or behind the char string is invalid. The middle blank in the char string is valid.
H.264 Network Digital Video Recorder User Manual Picture 4.29 user management modify user Modify the existed user attribute. modify team Modify the existed team attribute. modify password Modify the user password. You can set 1-6 bit password. The blank ahead or behind the char string is invalid. The middle blank in the char string is valid. Note The user who possess the user control purview can modify his/her own or other user password Picture 4.
H.264 Network Digital Video Recorder User Manual Picture 4.31 add user add team Add a user team and set the purview. There are 36 different purviews: shut down the equipment, real time surveillance, playback, recording setup, video file backup and so on. Picture 4.32 add team delete user Delete the current user. Choose the user and click delete user button. delete team Delete the current team (there is no need to ensure that the team users). In Picture 4.25, click the delete team button in Picture 4.
H.264 Network Digital Video Recorder User Manual Picture 4.33 delete team 4.9.4 Upgrade Picture 4.34 upgrade upgrade choose USB interface. upgrade file choose the file which need upgraded. 4.9.5 Restore config The system resume to the default setup. You can choose the items according to the menu. Picture 4.
H.264 Network Digital Video Recorder User Manual 4.9.6 Backup You can backup the video files to external storage through setup. Note The storage must be installed before the file backup.If the backup is terminated, the already copy files can be playback individually. If the backup is stop midway,the already copy files also can be playback individually. Picture 4.36 detect the equipment detect Detect the storage connected with the DVR such as hard disk or universal disk.
H.264 Network Digital Video Recorder User Manual Picture4.37 file backup remove add Clear the file information. Show the file information satisfying the set file attributes. start/pause Click the play button to start the backup and click the pause button to stop the backup. cancel During backup you can exit the page layout to carry out other functions. 4.9.7 Device Info Provision of equipment interface device information to facilitate the understanding of our customers use. Picture4.38 device info 4.
H.264 Network Digital Video Recorder User Manual 5. Netview and Management 5.1 WEB network control 1 Net connection Before the WEB operation,need to connect this device with the network.
H.264 Network Digital Video Recorder User Manual Picture 5.1 WEB Login interface Step 2: Login. Enter the user name and password, the company factory default administrator user name admin, password is blank. After Logged ,please promptly change the administrator password. Login is successful, display the interface as shown below. Picture 5.
H.264 Network Digital Video Recorder User Manual In Picture 5.2 WEB control interface to operate WEB.
H.264 Network Digital Video Recorder User Manual Picture 5.
H.264 Network Digital Video Recorder User Manual As the follow prompts to input the DVR device requires information, confirmed and adding successful, repeat the above operation, can be added to multiple DVR equipment, management and monitoring operations. If you want to modify the equipment which have added before,selected the modify the DVR at first,then click the icon to modify the parameters,but also can delete the DVR which added on the regional list already for deletion.
H.264 Network Digital Video Recorder User Manual Equipment updated in real time,if upgraded without notice; If have doubt or dispute for product description,all as to the ultimate interpretation of the company; The manual for the number of products that do reference the specific operation of each product is not an exhaustive encounter difficult problems please contact the company customer service department. 6. FAQ and Maintenance 6.
H.264 Network Digital Video Recorder User Manual 4 2 The cables of the hard disk are damaged. 3 The hard disk is damaged. 4 The SATA port of main board is damaged. There are no video outputs in single channel, multiple channels and all channels. Possible reasons are as followed: 5 1 The program is not matched. Please update the program. 2 The image brightness is all 0. Please resume the default setup. 3 There is no video input signal or the signal is too weak.
H.264 Network Digital Video Recorder User Manual 5 8 The hardware of the DVR is damaged. There is no audio signal in the surveillance window. Possible reasons are as followed: 9 1 It is not an active tone arm. 2 It is not an active sound box. 3 The audio lines are damaged. 4 The hardware of the DVR is damaged. There is audio signal in the surveillance window but mo audio signal in the playback state. Possible reasons are as followed: 10 1 Setting issues: the audio option is not chosen.
H.264 Network Digital Video Recorder User Manual 13 2 The motion detect area set is not correct. 3 The sensitivity is too low. 4 Limited by some hardware edition. I can not login via web. Possible reasons are as followed: 1 The system is windows 98 or windows me. We recommend updating to windows 2000sp4 or higher edition or installing the software for low edition. 2 14 ActiveX is hold back. 3 The edition is not exceeded dx8.1. Update the display card driver. 4 Network connection failure.
H.264 Network Digital Video Recorder User Manual 17 2 The data is too much. Please stop recording and backup. 3 The data exceeds the backup storage. 4 The backup equipment is not compatible. 5 The backup equipment is damaged. The keyboard can not control the DVR. Possible reasons are as followed: 1 The serial port of the DVR is not set correctly. 2 The address is not correct. 3 When multiple transformers are connected, the power supply is not large enough.
H.264 Network Digital Video Recorder User Manual Possible reasons are as followed: 22 1 Front vidicon quality is bad. The lens is too dirty. The vidicon is in backlighting installation. 2 The hard disk capability is not enough. 3 The hard disk is damaged. The downloading files can not play. Possible reasons are as followed: 1 There is no media player. 2 There is no DX8.1 software or higher edition. 3 There is no DivX503Bundle.exe file to play AVI video files. 4 The DivX503Bundle.
H.264 Network Digital Video Recorder User Manual Appendix 1.
H.
H.264 Network Digital Video Recorder User Manual Appendix 3.Hard Disk capability calculation Make sure the hard disk installed to install the DVR for the first time. Pay attention to the IDE hard disk lines connection. 1 Hard disk capability There is no limit for recording machine. We recommend 120G~250G size to keep better stability.
H.264 Network Digital Video Recorder User Manual display 1/4 image display Video standard PAL 625string Surveillance image quality 1/4/8/9 image display 1/4/8/9/16 image display 50 field/s PAL, D1(704×576) Playback image quality Video Image compression Image control Recording speed(CIF) Audio PAL, 200fps overall overall G.
H.