Operating and Installation instructions

Cleaning and care
33
Assembling the burner
a
b
c
a
b
c
d
f
e
g
d
 Place the burner head onto the
burner base so that the ignition
safety device and the ignitor ex-
tend through their respective holes in
the burner head.
The lobe on the burner cap must
fit into the recess on the burner
head. The lobe on the burner head
must fit into the recess on the
burner base.
 Replace the burner ring.
 Then place the burner caps and
in position.
 Burners cannot function cor-
rectly if they are incorrectly assem-
bled. This can lead to damage to the
appliance and injury.
Ensure that all parts of the burner are
reassembled in the correct order.