Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Overview
- Before first use
- Cookware
- Energy saving tips
- Operation
- Safety features
- Cleaning and care
- Frequently Asked Questions
- Optional accessories
- Customer Service
- Installation
- IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION
- Safety distances
- Installation notes
- Installation dimensions
- Countertop cut-out for several ProLine elements
- Installation
- Preparing the countertop
- Securing the spring clamps and spacer bars – wooden countertops
- Securing the spring clamps and spacer bars – granite and marble countertops
- Installing the ProLine element
- Installing several ProLine elements
- Connecting the ProLine element
- Checking for proper function
- Removing a ProLine element
- Gas connection
- Burner ratings
- Electrical connection
Frequently Asked Questions
36
Problem Possible cause and solution
The in-operation/resid-
ual-heat indicator for a
burner is flashing.
There has been a power outage.
Turn all knobs clockwise to the position. When
the power supply is restored, the cooktop can be
operated again as usual.
The ignitor does not
function properly.
The circuit breaker in the building’s wiring system
was tripped.
If necessary, contact a qualified service technician
or Technical Service for assistance.
There is food residue stuck between the ignitor and
the burner cap.
The thermocouple is dirty.
Remove any soiling (See “Cleaning and care”).