Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Overview
- Before first use
- Cookware
- Energy saving tips
- Operation
- Safety features
- Cleaning and care
- Frequently Asked Questions
- Optional accessories
- Customer Service
- Installation
- IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION
- Safety distances
- Installation notes
- Installation dimensions
- Countertop cut-out for several ProLine elements
- Installation
- Preparing the countertop
- Securing the spring clamps and spacer bars – wooden countertops
- Securing the spring clamps and spacer bars – granite and marble countertops
- Installing the ProLine element
- Installing several ProLine elements
- Connecting the ProLine element
- Checking for proper function
- Removing a ProLine element
- Gas connection
- Burner ratings
- Electrical connection
Installation
*INSTALLATION*
44
Calculating the countertop cut-out
The frames of the ProLine elements overlap the countertop at the outside right
and left by 5/16" (8mm) on each side.
Add up the widths of the ProLine elements and subtract 5/8" (16mm) from this
sum.
Example:
115/16" + 11 5/16" + 14 15/16" = 37 5/8" - 5/8" = 37"
(288mm+288mm+380mm = 956mm-16mm = 940mm)
The ProLine elements are 11 5/16", 14 15/16" or 22 11/16" (288mm, 380mm or
576mm) wide depending on the model (see “Installation” – “Installation dimen-
sions”).
Spacer bars
When installing several ProLine elements, a spacer bar must be installed between
the individual appliances. The position for securing the spacer bar will depend on
the width of the ProLine element.