Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Overview
- Before first use
- Cookware
- Energy saving tips
- Operation
- Safety features
- Cleaning and care
- Frequently Asked Questions
- Optional accessories
- Customer Service
- Installation
- IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION
- Safety distances
- Installation notes
- Installation dimensions
- Countertop cut-out for several ProLine elements
- Installation
- Preparing the countertop
- Securing the spring clamps and spacer bars – wooden countertops
- Securing the spring clamps and spacer bars – granite and marble countertops
- Installing the ProLine element
- Installing several ProLine elements
- Connecting the ProLine element
- Checking for proper function
- Removing a ProLine element
- Gas connection
- Burner ratings
- Electrical connection
Installation
*INSTALLATION*
46
Securing the spring clamps and
spacer bars – granite and marble
countertops
You will need heavy-duty double-sided
adhesive tape (not supplied with the
appliance) to fasten the spring clips or
spacer bars.
a
b
1"-1
3/16"
(25 mm - 30 mm)
c
a
Attach the adhesive tape along the
top edge of the cut-out in the posi-
tions shown in the cooktop illustra-
tion.
Position the spring clips or spacer
bars on the top edge of the cut-
out and press them firmly into place.
a
b
Apply silicone adhesive to the side
edges and bottom edge of the spring
clips or spacer bars.
Then fill the gap between the
spacer bars and the countertop
with silicone.