Operating and Installation instructions

Installation
*INSTALLATION*
47
Installing the ProLine element
 Feed the power cord down through
the cut-out in the countertop.
 Starting at the front, position the Pro-
Line element in the cut-out.
 Using both hands, press down evenly
on the sides of the ProLine element
until it clicks into position. When do-
ing this make sure that the seal of the
appliance sits flush with the counter-
top on all sides. This is important to
ensure an effective seal all round.
Do not use any additional sealant
(e.g., silicone) on the ProLine ele-
ment.
If during installation the seal around
the frame does not sit flush with the
countertop in the corners, the corner
radius (≤R4) can be carefully filed
down to fit.
Installing several ProLine elements
 Push the built-in ProLine element to
the side until the holes in the spacer
bar can be seen.
a
b
 Push the cover into the designated
holes in the spacer bar.
 Starting at the front, position the next
ProLine element in the countertop
cut-out.
 Proceed as described previously.