Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Overview
- Before first use
- Cookware
- Energy saving tips
- Operation
- Safety features
- Cleaning and care
- Frequently Asked Questions
- Optional accessories
- Customer Service
- Installation
- IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION
- Safety distances
- Installation notes
- Installation dimensions
- Countertop cut-out for several ProLine elements
- Installation
- Preparing the countertop
- Securing the spring clamps and spacer bars – wooden countertops
- Securing the spring clamps and spacer bars – granite and marble countertops
- Installing the ProLine element
- Installing several ProLine elements
- Connecting the ProLine element
- Checking for proper function
- Removing a ProLine element
- Gas connection
- Burner ratings
- Electrical connection
Installation
*INSTALLATION*
48
Connecting the ProLine element
Connect the ProLine element(s) to the
domestic power supply and to the
gas supply (see “Installation“ – “Elec-
trical connection” and “Gas connec-
tion”).
Checking for proper function
After installing the appliance, ignite all
burners to check that they are operat-
ing correctly:
- The flame must not go out on the
lowest setting, or when the knob is
turned quickly from the highest to the
lowest setting.
- On the highest setting, the flame
must have a distinctive and visible
core.
Removing a ProLine element
If the ProLine element is accessible
from below, push it up to remove it.
Push the back of the appliance out
first.
If the ProLine element is not accessi-
ble from below, take hold of it with
both hands at the back, pull it for-
ward, then lift it up and out.