Operating and installation instructions Cooker hood To prevent the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Contents Warning and Safety instructions...................................................................... 4 Caring for the environment .............................................................................. 13 Guide to the cooker hood ................................................................................. 14 Modes of operation ........................................................................................... 16 Before using for the first time ................................
Contents Grease filters and panel for edge extraction ....................................................... Replacing the grease filters ............................................................................ Charcoal filters .................................................................................................... Resetting the charcoal filter operating hours counter .................................... Disposing of charcoal filters .........................................................
Warning and Safety instructions This cooker hood complies with all relevant local and national safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Read the operating and installation instructions carefully before using the cooker hood. They contain important information on its safety, installation, use and maintenance. This prevents both personal injury and damage to the cooker hood.
Warning and Safety instructions The cooker hood can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised whilst using it, or have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation. Safety with children Children under 8 years of age must be kept away from the cooker hood unless they are constantly supervised.
Warning and Safety instructions Technical safety Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. A damaged appliance can be dangerous. Check it for visible signs of damage. Do not use a damaged appliance. The electrical safety of this appliance can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is met.
Warning and Safety instructions EXT/EXTA model cooker hoods are connected to their external motor using a special connection cable and plug connectors. These appliances may only be combined with a Miele external motor. For safety reasons, this appliance may only be used after it has been built in. The cooker hood must not be used in a non-stationary location (e.g. on a ship).
Warning and Safety instructions Using at the same time as another heating appliance that depends on the air from the room Danger of toxic fumes! Great care should be taken when using the cooker hood in the same room or the same area of the house at the same time as another heating appliance that depends on the air from the room. Such heating appliances draw in air from the room and duct exhaust gases out through a chimney or extraction ducting.
Warning and Safety instructions In order to ensure safe operation and to prevent gases given off by the heating appliance from being drawn back into the room when the cooker hood and the heater are both operated simultaneously, an underpressure in the room of 0.04 mbar (4 Pa) is the maximum permissible. Sufficient ventilation can be maintained by air inlets which cannot be blocked, e.g. in windows, doors and outside wall vents. The cross-section of the inlet openings must enable sufficient ventilation.
Warning and Safety instructions Correct use Open flames are a fire hazard. The use of an open flame under the cooker hood is not permitted. To avoid the danger of fire, do not flambé or grill over an open flame. When switched on, the cooker hood could draw flames into the filter. Fat deposits could ignite, presenting a fire hazard. The cooker hood can become damaged when exposed to excessive heat. - When using the cooker hood over a gas hob, ensure that any burners in use are always covered by a pan.
Warning and Safety instructions Do not use the cooker hood without the filters in place. This way you will avoid the risk of grease and dirt getting into the appliance and hindering its smooth operation. The cooker hood can get very hot during cooking due to heat rising from the hob. Do not touch the housing or the grease filters until the cooker hood has cooled down.
Warning and Safety instructions The appliance must not be connected to a chimney or flue which is in use. Neither should it be connected to ducting which ventilates rooms with fireplaces. If exhaust air is to be extracted into a chimney or ventilation duct no longer used for other purposes, seek professional advice. Cleaning and care There is a risk of fire if the cooker hood is not cleaned as described in these operating instructions.
Caring for the environment Disposing of the packaging material Disposing of your old appliance The packaging material is used for handling and protects the appliance from transport damage. The packaging material used is selected from materials which are environmentally friendly for disposal and can generally be recycled. Electrical and electronic appliances contain many valuable materials.
Guide to the cooker hood 14
Guide to the cooker hood a Exhaust duct Exhaust air can be directed through the back of the cooker hood or upwards to the ceiling.
Modes of operation Depending on the model of the cooker hood, the following options are available: Operation with an external motor (EXT/EXTA model cooker hoods) Extraction mode The cooking vapours are drawn in by the cooker hood. The air is then passed via the edge extraction panel through the grease filters, cleaned and then directed outside. Recirculation mode The air is drawn in and passed via the edge extraction panel through the grease filters and then through 2 charcoal filters.
Before using for the first time Selecting extraction mode or recirculation mode The cooker hood is suitable for both extraction mode and recirculation mode. The power of the fan is adapted to suit the selected operating mode. The cooker hood is delivered set up for recirculation mode. It has to be reset for extraction mode. To reset it for extraction mode, the operating hours counter for the charcoal filter(s) has to be deactivated. Switch off the fan and the lighting.
Before using for the first time Miele@home availability For the registration, you will need: The ability to use the Miele app depends on the availability of the Miele@home service in your country. 1. Your WiFi network password 2. Your cooker hood password The Miele@home service is not available in every country. For information about availability, please visit www.miele.com. Miele App The Miele App is available to download free of charge from the Apple App ® Store or from the Google Play Store™.
Before using for the first time Switch the cooker hood off. Connecting via WPS Your WiFi router must support WPS (WiFi Protected Setup). Press and hold the control. Switch the cooker hood off. Press the lighting control at the same time . Press and hold the control. 2 will light up constantly, 3 will flash on and off. The cooker hood will be ready for connection in the next 2 minutes. Follow the instructions in the app. When successfully connected, 2 and 3 will light up constantly.
Before using for the first time Sign out of WiFi (reset to factory settings) Start the WiFi connection on your WiFi router. To set up a new WiFi connection, the existing WiFi connection must be disconnected. Switch the cooker hood off. When successfully connected the 2 and 3 will light up constantly. Quit connection mode on the cooker hood by pressing the Run-on control . The cooker hood can now be operated via the app.
Before using for the first time Setting up Con@ctivity Touch the control. 2 will light up constantly, 3 will flash on and off. After a few seconds, 2 and 3 will flash on and off. The connection has now been disconnected. Quit signing-off mode on the cooker hood by pressing the run-on control . The WiFi connection has now been disconnected. A new connection can now be set up. Con@ctivity is the direct communication system between an electric Miele hob and a Miele cooker hood.
Before using for the first time Con@ctivity via the home WiFi network (Con@ctivity 3.0) Prerequisite: Start WiFi connection on the hob. For further details, see the hob operating instructions. - Home WiFi network - WiFi-enabled Miele hob Connect the cooker hood and hob to your home WiFi network (see “Setting up Miele@home”). The Con@ctivity function will be activated automatically. Con@ctivity via a direct WiFi connection (Con@ctivity 3.
Operation (Automatic mode) When Con@ctivity is active, the cooker hood always operates in automatic mode (see “Before using for the first time” – “Setting up Con@ctivity”). If you wish to manually operate the cooker hood, see “Operation (Manual mode)” – “Cooking without Con@ctivity”. Cooking with Con@ctivity (Automatic mode) Switch a cooking zone on at the desired power level. The hob lighting will come on.
Operation (Automatic mode) Switching off Returning to automatic mode Switch off all cooking zones. The cooker hood will resume automatic mode: The cooker hood fan will reduce its power level in stages over the next few minutes and will then switch itself off. This helps to neutralise any lingering vapours and odours in the air. - From the Booster setting, the fan switches immediately to Level 3. - From Level 3, it will switch to Level 2 after approx. 1 minute.
Operation (Manual mode) Cooking without Con@ctivity (Manual mode) The cooker hood can be operated manually if: - The Con@ctivity function is not activated. - You have temporarily deactivated the Con@ctivity function (see “Operation (Manual operation)” – “Leaving automatic mode temporarily”). Selecting the run-on time It is advisable to run the fan for a few minutes after cooking has finished. This helps to remove any lingering vapours and odours from the air.
Operation (Manual mode) Dimming/switching the hob lighting on/off The hob lighting can be switched on and off and dimmed independently of the fan. Press the lighting sensor briefly to switch it on or off. The lighting will switch on at maximum brightness. With the lighting switched on, press and hold the hob lighting control . The brightness will gradually dim until you release the control.
Operation (Manual mode) Safety switch-off If Power management has been deactivated, the cooker hood will switch itself off automatically after 12 hours if it has been left on (fan and hob lighting). To switch it on again press the On/ Off control or the lighting control .
Operation (Automatic and Manual modes) Operating hours counter Switch off the fan and the lighting. The cooker hood registers the length of time it has been operated. Press the run-on control and the operating hours control at the same time. When the grease filter symbol or the charcoal filter symbol lights up, the operating hours counters are signalling that the filters need to be cleaned or changed.
Operation (Automatic and Manual modes) Altering or deactivating the charcoal filter operating hours counter Reading the filter operating hours counter Charcoal filters are needed for recirculation mode. You can check the percentage of time set already used before the filter needs replacing. You can set the operating hours counter to suit the type of cooking you do. It has to be deactivated for extraction mode. It is set at the factory for 180 hours of use before the filters need replacing.
Energy saving tips This cooker hood operates very efficiently and economically. The following will help you to save even more energy when using it: - Ensure that there is sufficient ventilation in the kitchen when cooking. In extraction mode, if there is insufficient air flow the cooker hood cannot operate efficiently and this causes increased operating noise levels. - Always cook with the lowest possible setting.
Cleaning and care Before proceeding with any maintenance or cleaning task, the cooker hood must be disconnected from the power supply (see “Warning and Safety instructions”). Housing General information Unsuitable cleaning agents can damage the surfaces and control elements. Do not use any cleaning agents containing soda, acid, chloride or solvent. Do not use any abrasive cleaning agents, e.g.
Cleaning and care Grease filters and panel for edge extraction Fire hazard Oversaturated grease filters are a fire hazard. Clean the grease filters at regular intervals. Removing the panel and grease filters The panel and grease filter can fall out when you are handling them. This can result in damage. Make sure you hold the panel and the grease filter securely at all times when handling them.
Cleaning and care Unsuitable cleaning agents Unsuitable cleaning agents can cause damage to the surface of the filters if used regularly. Do not use: - cleaning agents containing descaling agents - powder cleaners, cream cleaners - aggressive multi-purpose cleaning agents or spray cleaners for grease - oven sprays Cleaning the panel and the grease filters in the dishwasher Open the grease filter retainer catch and remove the filter.
Cleaning and care After cleaning After cleaning, leave the filters to dry on an absorbent surface before replacing them. When removing the panel and filters for cleaning, also clean off any residues of oil or fat from the now accessible parts of the casing to prevent the risk of these catching fire. Refit the grease filters, making sure that the latch faces outwards. If a grease filter is inadvertently fitted upside down, insert a small screwdriver blade into the slit to disengage the clip.
Cleaning and care Resetting the grease filter operating hours counter After cleaning, the operating hours counter needs to be reset. Whilst the fan is switched on, press the operating hours control for approx. 3 seconds, until only 1 is flashing. The grease filter symbol goes out. If you want to clean the grease filters before the operating hours counter has reached its maximum: Press the operating hours control for approx. 6 seconds, until only 1 is flashing.
Cleaning and care When to change the charcoal filters Replace the charcoal filters when they no longer absorb kitchen odours effectively, and at least every 6 months. The operating hours counter will remind you to replace the charcoal filters by lighting up the charcoal filter symbol . Resetting the charcoal filter operating hours counter After changing the charcoal filters, the operating hours counter needs to be reset.
*INSTALLATION* Installation Before installation Before installation, it is important to read the information given on the following pages as well as the “Warning and Safety instructions” at the beginning of this booklet. The cooker hood is intended for installation in a wall unit, chimney unit or above breakfast bars or island areas. Check prior to installation that the top of the appliance will be accessible after installation.
*INSTALLATION* Installation Appliance dimensions The drawing is not to scale 38
*INSTALLATION* Installation The drawing is not to scale 39
*INSTALLATION* Installation a Alternative vent connection at the back. b Alternative vent connection with 222 x 89 mm flat ducting for ducting to the rear or to the side. c The cooker hood is fastened in the cut-out using clamps. A solid installation surface, e.g. made of wood, is required. Make sure that the structure can support the load. Around the clamps, components such as supports and ducting must be at least 25 mm from the cut-out.
*INSTALLATION* Installation Installation recommendations - When deciding on the safety distance between the hob and cooker hood, please note that a distance of 650 mm above electric cookers/hobs may be preferable to give more working space under the hood. - Account should also be taken of the height of the person who will be using the hood most often. They should have sufficient space to work comfortably at the hob, and be able to reach the cooker hood controls with ease.
*INSTALLATION* Installation e ntag tallation aje gio nt Ins Mo Montag ntering agem s nt Mo Mo Asennu Mo 4 M5 x 40 mm screws, 4 washers, 4 M5 nuts for securing the cooker hood to an interim shelf. 10 M4 x 8 mm screws for securing the cooker hood. 4 M4 x 12 mm screws for additional securing of the cooker hood to uneven surfaces. Conversion kit for recirculation mode including directional unit, aluminium hose and hose clips (the conversion kit is not supplied and must be purchased separately.
*INSTALLATION* Installation Uneven installation surfaces If the installation surface is uneven making flush installation difficult, the frame can be realigned. Fit the cooker hood as described on the installation sheet. Disconnect the cooker hood from the mains electrical supply before replacing the lamps (see “Warning and Safety instructions”). Fit one of the screws supplied into each lamp opening. Tighten the screws with a screwdriver until the frame sits flush with the installation surface.
*INSTALLATION* Installation Connection for air extraction If the cooker hood is used at the same time as a heating appliance that relies on oxygen from the same room, there is a risk in certain circumstances of toxic fumes building up. It is essential that the “Warning and Safety” instructions are observed. The cooker hood should be installed according to local and national building regulations. Seek approval from the building inspector where necessary.
*INSTALLATION* Installation Non-return flap Use a non-return flap in the exhaust system. A non-return flap ensures that when the cooker hood is not in operation, the duct is closed to prevent unwanted exchange of room air and outside air. If the exhaust is ducted through an outside wall, a Miele wall vent or roof vent (available as an optional accessory) is recommended. Both of these have a built-in non-return flap.
*INSTALLATION* Installation Silencer To reduce noise levels even further, a silencer (optional accessory) can be installed in the exhaust ducting. In extraction mode, the silencer not only reduces noise from the fan outside the house, but also sounds originating outside reaching the kitchen through the exhaust ducting (e.g. traffic noise). For this reason, the silencer must be positioned as close as possible to the ducting exit .
*INSTALLATION* Installation Electrical connection The cooker hood is supplied with a mains cable with moulded plug ready for connection to a suitable earthed socket. If the socket is not easily accessible or a fixed connection is envisaged, ensure that a suitable means of disconnection is provided on the installation side for each pole. Risk of fire from overheating. Connecting the cooker hood to multi-socket adapters or extension cables can overload the cables.
Service Contact in the event of a fault In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department. You can book a Miele Customer Service Department call-out online at www.miele.com/service. Contact information for the Miele Customer Service Department can be found at the end of this document. Please quote the model identifier and serial number of your appliance (Fabr./ SN/Nr.) when contacting the Miele Customer Service Department.
Technical data Fan motor* 80 W Hob lighting DA 2668 2 x 4.5 W DA 2698 4x3W DA 2628 3 x 4.5 W Total rated load* DA 2668 89 W DA 2698 92 W DA 2628 93.5 W Mains voltage, frequency AC 230 V, 50 Hz Fuse rating Mains connection cable length 3A 1.5 m Weight DA 2668 12 kg DA 2698 14 kg DA 2628 15 kg DA 2698 EXTA 11 kg * For EXTA models, the rated load and extraction power will depend on the type of external motor fitted. Length of connection cable to external motor: 1.
Technical data EU Conformity declaration Miele hereby declares that this cooker hood complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.ie - For service, information, operating instructions etc: go to www.miele.ie/ domestic/customer-information-385.
Technical data Data sheet for household cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
Technical data Data sheet for household cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
Technical data Data sheet for household cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
Technical data Data sheet for household cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Level 4, 141 Camberwell Road Hawthorn East, VIC 3123 Tel: 1300 464 353 Internet: www.miele.com.au Ireland Miele Ireland Ltd. 2024 Bianconi Avenue Citywest Business Campus Dublin 24 Tel: (01) 461 07 10 Fax: (01) 461 07 97 E-Mail: info@miele.ie Internet: www.miele.
DA 2668, DA 2698, DA 2628, DA 2698 EXTA en-GB M.-Nr.