Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- Before using for the first time
- Pans
- Tips on saving energy
- Operation
- Safety features
- Cleaning and care
- Problem solving guide
- Optional accessories
- After sales service
- Installation
- Safety instructions for installation
- Safety distances
- Installation notes
- Installation dimensions – Surface-mounted
- Installation – surface-mounted
- Installation dimensions – Flush
- Installation – flush-fit
- Installation in a stainless steel worktop
- Securing the hob
- Functional check
- Gas connection
- Burner ratings
- Electrical connection
- Converting to another gas type
- Product data sheets
Installation
*INSTALLATION*
48
Preparing the worktop
Create the worktop cut-out as shown
in the hob and inset diagrams. Re-
member to maintain the minimum
safety distances (see “Installation –
Safety distances”).
Solid wood and tiled worktops:
Secure the wooden frame 2mm
below the top edge of the worktop.
Installing the hob
Feed the power cable for the hob
down through the worktop cut-out.
Centre the hob in the cut-out.
Connect the hob to the electricity
supply (see “Installation – Electrical
connection”).
Connect the hob to the gas supply
(see “Installation – Gas connection”).
Secure the hob (see “Installation –
Securing the hob”).
Check that the hob works (see “In-
stallation – Functional check”).
Seal the remaining gap with a silic-
one sealant that is heat-resistant to at
least 160°C.
Unsuitable sealant can damage nat-
ural stone.
For natural stone worktops and nat-
ural stone tiles, only use silicone
sealant that is specially formulated
for natural stone.
Follow the manufacturer’s instruc-
tions.