Operation Manual

,
Ensure that the dryer is installed
and connected to the electricity
supply correctly. If the tumble dryer
has not been transported as
described in "Installation and
connection" then it must be left to
stand for at least 1 hour before
it is
connected to the electricity supply.
^
Press the On/Off button s briefly to
switch on.
As soon as the dryer is ready to use,
the Entry menu appears.
When the tumble dryer is switched on
for the first time, the Miele Professional
welcome screen will appear.
The display for setting the language will
then appear.
Setting the language
C dansk -
F
deutschB
english H
^
Use the + and – buttons to select the
language you want, and confirm your
choice by pressing the OK button.
A tick L will appear beside the
language to show that it has been set.
Setting the time (of day) (if necessary)
It is possible to alter the time at any
stage via the Settings menu.
10 :00
Set the time of day
^
Set the hour with the – and + buttons,
and confirm your selection by
pressing the OK button.
^
Now set the minutes and confirm
your selection.
Entry menu
The Entry menu will always appear after
the dryer has been switched on, until
you select a programme.
10:00
Select a programme
Settings F...
See "Settings menu" at the end of this
booklet for more information.
^
You can now load the laundry into the
dryer and select a programme as
described in "Short instructions".
Before using for the first time
19