Operation Manual

This machine must be installed in accordance with local and national building and safety regulations by a
suitably qualified engineer. In the U.K. this must be done for gas-heated machines by a Gas Safe registered
engineer. Adequate ventilation must be present in the room in which the machine is operated.
It is essential to read these instructions before installing and operating the machine.
Gas-heated machines
Safety precautions to take if you smell gas
– Turn off the gas emergency control valve immediately. This is usually located near the gas meter.
– Do not enter a room with an open flame where there is a smell of gas.
– Eliminate all sources of ignition in a safe manner. Do not smoke, light cigarette lighters or matches.
– Do not operate electrical lights or switches, i.e. do not switch them "On" or "Off".
– Open all windows and doors to ventilate the area.
– If the smell of gas persists, evacuate the building.
In the UK you must now:
- Call the Gas Emergency Contact Centre (Tel: [phone])
- For any gas work in the UK always use a Gas Safe registered engineer.
In other countries please follow relevant country specific procedures on gas.
Keep these instructions in a safe place and ensure they are made available to new users. They must be made
aware of these Warning and Safety instructions.
All personnel working with this machine must be fully trained in all aspects of its use and safety.
Gas safety precautions
2