Operation Manual

Washer-dryer stack
A Miele tumble dryer can be stacked
on top of this washer-extractor. A "WTV"
stacking kit (optional accessory) is
required for this.
The stacking kit must be fitted by a
Miele authorised service technician.
Replacing the lid
If the lid to the washer-extractor has
been removed to stack it with a tumble
dryer, this must be replaced securely
when the washer-dryer stack is
dismantled.
Installation on a raised plinth
The washer-extractor can be installed
on a steel plinth (open or closed,
available as an optional Miele
accessory) or on a concrete plinth.
,
If the machine is installed on a
plinth, it must be secured using the
fixing brackets supplied with the
machine. Otherwise there is the
danger of the machine moving and
falling off the plinth during spinning.
Payment system
This washer-extractor can be fitted with
a payment system (optional accessory).
This must be connnected and
programmed by a Miele service
technician.
Coins / tokens must be removed
from the coin box regularly,
otherwise it will become blocked.
Installation and connection
60