Operation Manual

The Settings menu (with the
exception of Language J) is locked
with a code to prevent it being
accessed by unauthorised
personnel.
C Back A
F Language F
Supervisor level
^
Select Supervisor level and confirm
your selection.
C Back A
X
Access via code
Change code...
^ Select Access via code and confirm
your selection.
To enter the code
You will now be asked to enter a
3-figure code. The code is set at 000 at
the factory. 000.
0 __
Enter code
^
Use the + button to enter the first
number. Confirm your selection of
this number by pressing the OK
button. Now enter the second digit.
^
Repeat the process until all three
numbers have been entered.
^
After the last number has been
entered, press the OK button.
The following will appear in the display:
W
Entry OK
Menu opened
You are now in Supervisor level.
You can alter the code if you want to
prevent it being accessed by
unauthorised personnel.
Settings/Supervisor level menu
69