User manual

Switching on and off
37
Before using for the first time
 Remove all packaging material and
protective film.
 Clean the inside of the appliance and
the accessories (see “Cleaning and
care”).
Connecting the refrigeration appli-
ance
 Connect the refrigeration appliance to
the electricity supply as described in
“Electrical connection”.
Miele will then appear on the appliance
display, followed by .
Switching the refrigeration ap-
pliance on
 Open the appliance door.
 Touch the OKsensor control on the
control panel.
The refrigeration appliance will start to
cool and the interior lighting will come
on when the appliance door is opened.
When the set freezer temperature is
reached, the 

symbol disappears,
the temperature display of the freezer
section lights up constantly and the
alarm stops.
 If the alarm annoys you, tap OK.
The alarm will stop.
The appliance will gradually reach the
pre-set temperatures.
To enable the temperature to get suf-
ficiently cold inside the refrigeration
appliance, allow the appliance to run
for a few hours before placing food
in it. Do not place food in the refri-
geration appliance until it has
reached the preset temperature.
Do not place food in the freezer zone
until it has reached the preset tem-
perature (min. -18°C).