User manual

Table Of Contents
Cleaning and care
70
Place the holder in the middle of the
rear protective strip of any adjustable
shelf, so that it clicks into position.
Touch the OKsensor control to con-
firm that the filters have been re-
placed.
The “Replace charcoal filter” reminder
will go out on the display and the
counter will be reset.
The symbol will go out on the start
display.
Cleaning the door seal
Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
The door seal should be cleaned reg-
ularly with clean water, and then
wiped dry with a soft cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the en-
ergy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example).