Operating instructions Fridge-freezer To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Contents Warning and Safety instructions...................................................................... 5 Caring for the environment .............................................................................. 16 Installation.......................................................................................................... Installation site..................................................................................................... Side-by-side combinations ........................
Contents The correct temperature................................................................................... Temperature display ............................................................................................ Setting the temperature in the refrigerator/freezer sections................................ Possible temperature settings ........................................................................ 40 41 41 41 Using Super cool, Super freeze and Dynamic cooling ......................
Contents Cleaning and care ............................................................................................. Cleaning agents................................................................................................... Preparing the refrigeration appliance for cleaning .............................................. Cleaning the inside of the appliance ................................................................... Cleaning accessories by hand or in the dishwasher........................
Warning and Safety instructions This refrigeration appliance complies with current safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Please read the operating and installation instructions carefully before using the refrigeration appliance for the first time. They contain important information on safety, installation, use and maintenance. This is to protect yourself from injury, and from damaging your refrigeration appliance.
Warning and Safety instructions Correct application This refrigeration appliance is intended for use in the home and in similar environments, for example – in shops, offices and similar work settings – by the guests in hotels, motels, bed & breakfasts and other typical home settings. This refrigeration appliance is not intended for outdoor use.
Warning and Safety instructions Children must not be allowed to clean or maintain the appliance unsupervised. Please supervise children in the vicinity of the appliance and do not let them play with it. Danger of suffocation! Whilst playing, children could become entangled in packaging (such as plastic wrapping) or pull it over their head and suffocate. Keep packaging material away from children. Technical safety The coolant circuit has been checked for leaks.
Warning and Safety instructions - Ventilate the room where the refrigeration appliance is located for several minutes. - Contact the Miele Customer Service Department. The more refrigerant there is in a refrigeration appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of a combustible gas/ air mixture building up. For every 8 g of refrigerant at least 1 m3 of room space is required.
Warning and Safety instructions If the electrical connection cable supplied is damaged, it must only be replaced by an original spare part to prevent a hazard for the user. Miele can only guarantee the safety of the appliance when original Miele spare parts are used. Do not connect the appliance to the mains electrical supply by a multi-socket adapter or extension lead. These are a fire hazard and do not guarantee the required safety of the appliance.
Warning and Safety instructions This refrigeration appliance is supplied with a special lamp to cope with particular conditions (e.g. temperature, moisture, chemical resistance, abrasion resistance and vibration). This lamp must only be used for the purpose for which it is intended. The lamp is not suitable for room lighting. Replacement lamps may only be fitted by a Miele authorised technician or by the Miele Customer Service Department.
Warning and Safety instructions Risk of fire and explosion. Do not store explosive materials in the refrigeration appliance or any products containing propellants (e.g. spray cans). Electrical components can cause flammable mixes of gases to ignite. Danger of explosion. Do not operate any electrical equipment (e.g. an electric ice-cream maker) inside the refrigeration appliance. Danger of sparking and explosion. Danger of injury and damage to the appliance.
Warning and Safety instructions Miele will guarantee to supply functional spare parts for a minimum of 10 years and up to 15 years following the discontinuation of your refrigeration appliance.
Warning and Safety instructions Cleaning and care Do not use any oils or grease on the door seals, as these will cause the seals to deteriorate and become porous with time. Do not use a steam cleaning appliance to clean or defrost this appliance. Steam could reach electrical components and cause a short circuit. Sharp edged or pointed objects will damage the evaporator, causing irreversible damage to the appliance.
Warning and Safety instructions Transport Always transport the appliance in an upright position and in its original transport packaging to avoid damage in transit. Danger of injury and damage to the appliance. The refrigeration appliance is very heavy and must be transported by two people. Disposal of your old appliance Children playing could become trapped in the appliance and could suffocate. - Remove the appliance doors. - Remove the drawers.
Warning and Safety instructions Splashes of coolant can damage the eyes. Be careful not to damage any part of the pipework whilst awaiting disposal, e.g. by - puncturing the coolant channels in the condenser, - bending any pipework, or - scratching the surface coating. Symbol on the compressor (depending on model) This information is only relevant for recycling. There is no risk during normal operation. The oil in the compressor can be fatal if swallowed or if it penetrates the airways.
Caring for the environment Disposal of the packing material Disposing of your old appliance The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electrical and electronic appliances contain many valuable materials. They also contain certain materials, compounds and components which were essential for their correct functioning and safety.
Caring for the environment in free of charge. Please ensure that your old appliance poses no risk to children while being stored for disposal.
*INSTALLATION* Installation Installation site Risk of damage and danger of injury due to the refrigeration appliance tipping over. This refrigeration appliance is very heavy and can tip forwards when the appliance door is open. Keep the appliance door(s) closed until the refrigeration appliance has been built in. The refrigeration appliance must be secured in its buildingin niche in accordance with the operating and installation instructions.
*INSTALLATION* Installation Risk of damage due to high hu- Climate range midity. In environments with high humidity, condensation can build up on external refrigeration appliance panels. This condensate can cause corrosion on external appliance panels. Install the refrigeration appliance in a dry and/or air-conditioned room with sufficient ventilation.
*INSTALLATION* Installation Ventilation Risk of fire and damage due to insufficient ventilation. If the refrigeration appliance is not ventilated sufficiently, the compressor will run more frequently and for longer periods. This will result in increased energy consumption and a higher operating temperature for the compressor. This may, in turn, cause damage to the compressor. Please ensure that there is adequate ventilation around the refrigeration appliance.
*INSTALLATION* Installation Appliance furniture door thickness A [mm] Weight of the furniture door Gap X [mm] for different edge radiiB R0 ≥16–19 R1.2 R2 If the furniture door panel is too R3 min. 3 20 5 4 4 3.5 21 5.5 5 4.5 4 22 6.5 6 5.5 5 heavy, this can cause damage. Fitting a furniture door panel which is heavier than the maximum permitted weight could damage the hinges. This can cause subsequent functional problems.
*INSTALLATION* Installation Building-in dimensions Installation in a tall unit/side view All dimensions are given in mm. * The declared energy consumption was calculated in a 560 mm deep niche. The refrigeration appliance is fully functional in a 550 mm niche but the energy consumption will be slightly higher. Before installation, ensure the housing unit dimensions are the correct size.
*INSTALLATION* Installation Connections and ventilation All dimensions are given in mm. The specified ventilation cross-sections must be adhered to in order to ensure the correct functioning of the refrigeration appliance. a View from the front b Mains connection cable, length = 2200 mm A longer mains connection cable is available to order from the Miele Customer Service Department. c Ventilation cross-section min.
*INSTALLATION* Installation Limiting the opening angle of the appliance doors The door hinges are set to enable the appliance doors to be opened wide. If the opening angle of the doors needs to be limited to approx. 90°, the hinge can be adjusted to accommodate this. The locking pins for limiting the door opening must be fitted before the refrigeration appliance is installed.
*INSTALLATION* Installation Electrical connection The refrigeration appliance must only be connected to an earthed socket using the mains connection cable supplied. The socket must be easily accessible after the refrigeration appliance has been installed. If the socket is not easily accessible, ensure that a suitable means of disconnection is provided on the installation side for each pole. Risk of fire from overheating.
*INSTALLATION* Installation Connecting the refrigeration appliance Insert the plug connector into the socket at the back of the refrigeration appliance. Make sure that the plug connector has clicked into position correctly. Insert the plug of the refrigeration appliance into the socket. The refrigeration appliance is now connected to the electricity supply.
Saving energy How to save energy: Installation site The refrigeration appliance has to cool more often at higher ambient temperatures and consumes more energy in the process. Therefore, you should: - Install the refrigeration appliance in a well-ventilated room. - Do not install the refrigeration appliance near to a heat source (heater element, cooker). - Protect the refrigeration appliance from direct sunlight. - Ensure an ideal ambient temperature of 20 °C.
Guide to the appliance 28
Guide to the appliance a Display b Fan with lighting c Adjustable shelf with lighting (FlexiLight 2.
Guide to the appliance Start display The touch display can be scratched by pointed or sharp objects, e.g. pens. Only touch the display with your fingers. If your fingers are cold, the touch display may not react.
Guide to the appliance Settings mode In Settings mode, you can select the following appliance functions and alter their settings to some extent: Symbol Function Factory default Switch the Party mode function on or off (see “Selecting further settings”) Off Switch the Holiday mode function on or off (see “Selecting further settings”) Off / Switch the system lock on or off (see “Selecting further settings”) (off) Switching the refrigeration appliance off (see “Switching on and off”)
Guide to the appliance Change the display brightness (see “Selecting further settings”) Level 4 Change the temperature unit (°Celsius or °Fahrenheit) °C Switch the Demo mode function off (only visible when switched on) (see “Selecting further settings”) Off Reset to default settings (see “Selecting further settings”) –– Call up information (model designation and serial number) about your refrigeration appliance (see “Selecting further settings”) –– Switch on the reminder to change t
Guide to the appliance Adjusting the interior fittings Using the door shelf fine adjustment Use the fine adjustment if you need greater height clearance on the door shelf/bottle shelf. Repositioning the door shelf with fine adjustment Only move the door/bottle shelves in the appliance door when they are empty. You can change the height of the door shelf while it is loaded. Hold the door shelf in both hands, press the grey buttons on both sides under it and move it.
Guide to the appliance Moving the door shelf/bottle shelf Only move the door/bottle shelves in the appliance door when they are empty. Moving the adjustable shelf/adjustable shelf with lighting The shelves can be adjusted according to the height of the food. Push the door/bottle shelves upwards, then remove them by pulling them forwards. Replace the door/bottle shelves at the required height. Clipping the egg trays on Clip the egg trays onto the rear edge of the door shelf.
Guide to the appliance Space for a baking tray A baking tray can be placed above the drawers. The baking tray can be no more than 466 mm wide, 386 mm deep and 50 mm high. Open the appliance door as far as it will go. The holder for the charcoal filters sits on a protective strip at the back of the shelf. To move the charcoal filter, pull the holder upwards to remove it from the protective strip. Then pull the protective strip off the shelf. Refit it on the shelf you wish to use it on.
Guide to the appliance Accessories supplied Egg tray Bottle holder Ice cube tray KKF-FS charcoal filter with holder (Active AirClean) Charcoal filters neutralise unpleasant odours in the refrigerator section for improved air quality. Optional accessories KKF-RF replacement charcoal filters (Active AirClean) A range of useful Miele accessories and care products are available for your appliance. Replacement filters to the fit the holder are available.
Guide to the appliance Adjustable shelf with pivotable glass shelf (FlexiTray) The pivotable glass shelf can be turned 180° clockwise, improving access to the food placed at the back. Optional accessories can be ordered from the Miele webshop. They can also be ordered from the Miele Customer Service Department (see end of this booklet for contact details) or from your Miele dealer. Organisation box The organisation box makes it easier to sort the food in the fridge zone drawer in a clear manner.
Switching on and off Before using for the first time Remove all packaging material and protective film. Clean the inside of the appliance and the accessories (see “Cleaning and care”). Connecting the refrigeration appliance Connect the refrigeration appliance to the electricity supply as described in “Electrical connection”. will then appear on the appliance display, followed by . Miele Switching the refrigeration appliance on Open the appliance door. Tap on the display.
Switching on and off Switching off the refrigeration appliance Switching the refrigerator section back on again separately You can only switch the entire refrigeration appliance in Settings mode . Tap in the temperature display for the refrigerator section. Tap . Tap . Swipe left or right until is shown in the middle. The refrigerator section switches back on. Tap . Switching off for longer periods of time The cooling system and interior lighting are switched off.
The correct temperature It is very important to set the correct temperature to ensure the shelf life of food. Reducing the temperature reduces the growth rate of microorganisms. Food does not spoil as quickly. ... in the refrigerator section The temperature in the refrigeration appliance will rise: To freeze fresh food, a temperature of -18 °C is required. This will prolong the storage life of your food and retain its quality.
The correct temperature Temperature display In normal operation, the temperature display shows the current average refrigerator section temperature and the maximum freezer section temperature. Depending on the ambient temperature and the temperature setting, it can take the appliance a few hours to reach the temperature required and for this temperature to then be shown as a constant temperature on the display.
Using Super cool, Super freeze and Dynamic cooling SuperCool When switched on, the SuperCool function can be used to rapidly reduce the temperature in the fridge zone to its lowest setting (depending on the ambient temperature). The refrigeration appliance will work at full power and lower the temperature. Select this function for the rapid chilling of large amounts of fresh food or drink. When the SuperCool function is switched on, the appliance may make more noise than usual.
Using Super cool, Super freeze and Dynamic cooling SuperFreeze When switched on, the SuperFreeze function can be used to rapidly reduce the temperature in the freezer section to its lowest setting (depending on the ambient temperature). The refrigeration appliance will work at full power and lower the temperature. Select this function before freezing fresh food. This helps food to freeze quickly and retain its nutrients, vitamins, flavours and appearance.
Using Super cool, Super freeze and Dynamic cooling DynaCool When the DynaCool function is not switched on, the natural circulation of air in the appliance will cause different temperature zones in the fridge zone, as the cold, heavy air will sink to the lowest section of the appliance. You should bear this in mind when placing food in the appliance (see “Storing food in the refrigerator section”). However, if you are storing a large amount of similar food in the refrigerator at any one time, e.g.
Selecting further settings Explanation of the different settings Only the settings that require further explanation are described below. The door alarm and other warnings are automatically suppressed when you are in Settings mode . Party mode The Party mode function is recommended if you wish to chill or freeze large amounts of fresh food or drink quickly. Tip: Switch on the Party mode function approx. 4 hours before placing food and drinks in the appliance.
Selecting further settings Tap . Sabbath mode Swipe left or right until is shown in the middle. The appliance offers a Sabbath programme for the purposes of religious observance. Tap . When the lock function is switched on, will light up orange. Close the appliance door. Only then will the lock function be active.
Selecting further settings Health risk caused by decomposing food. As power failures are not indicated while Sabbath mode is active, food may be exposed to increased temperatures for a certain period of time. This will reduce the storage life of the food. If there is a power failure during Sabbath mode , check the quality of the food. Switching Sabbath mode off Tap on the black display. will appear on the display. Tap .
Selecting further settings Miele@home Availability of the WiFi connection To use this feature, you will need: The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This can give rise to sporadic or even complete connection failures. Therefore, the availability of featured functions cannot be guaranteed.
Selecting further settings Setting up Miele@home for the first time Tap . Swipe left or right until is shown in the middle. Tap . Tap on the connection method you wish to use (app or WPS). Resetting the network configuration Tap . Swipe left or right until is shown in the middle. Tap . Swipe right until is shown in the middle. Tap . After you have successfully logged in, will appear on the start display. Tap OK. If a connection could not be created, will appear.
Selecting further settings Changing the volume of the alarms and buzzers / You can change the volume of the alarms and buzzers (e.g. in the event of a door alarm or a fault message). Alternatively, you can switch the alarms and buzzers off if you find them annoying. Tap . Swipe left or right until is shown in the middle. Tap . Select the volume you want by swiping the segment bar to the left or right. Confirm the volume you want by tapping on the segment bar.
Selecting further settings Resetting the settings to their default settings All settings made on the refrigeration appliance will be reset to default settings (for settings, see “Guide to the appliance”). Tap . Swipe left or right until is shown in the middle. Tap . will appear on the display. Tap OK. The refrigeration appliance shuts down and must be switched on again. Information Appliance data (model number and serial number) is shown on the display.
Temperature and door alarm Health risk caused by decomposing food. If the temperature in the freezer remains above -18 °C for a long time, the frozen food can start to defrost. This will reduce the storage life of the food. Check whether the frozen food has started to defrost. If it has, check that the food is safe to use and if it is, then use it as soon as possible or cook it before freezing it again.
Temperature and door alarm Door alarm The refrigeration appliance is fitted with a warning system to avoid increased energy consumption and food becoming warm if the appliance door is left open. If an appliance door is left open for a longer period of time, will light up yellow on the relevant temperature display. An alarm will also sound. You can change the time before the door alarm is triggered. However, the door alarm can also be turned off (see “Selecting further settings”).
Storing food in the fridge zone Risk of explosion due to flam- Different storage zones mable mixes of gases. Electrical components can cause flammable mixes of gases to ignite. Do not store explosive materials in the refrigeration appliance or any products containing propellants (e.g. spray cans). The spray cans in question can be identified by the contents printed on the can or by a flame symbol. Electrical components can cause escaping gases to ignite.
Storing food in the fridge zone Coldest area The coldest area in the fridge zone is directly above the DailyFresh drawer and at the back of the appliance. A temperature setting of 4 °C combined with appropriate hygiene measures delays the propagation of bacteria, e.g. salmonella and listeria, which can lead to serious food poisoning.
Storing food in the fridge zone Storing food correctly Ensure that food stored in the fridge zone is in packaging or covered properly (some exceptions apply in the DailyFresh drawer). This will prevent food odours from affecting other food, stop food from drying out and also prevent any cross-contamination of bacteria. This is particularly important when storing meat products. Make sure that food such as raw meat and fish in particular does not come into contact with other food.
Storing food in the DailyFresh drawer The DailyFresh drawer provides good storage conditions for fruit and vegetables. The humidity level in the DailyFresh drawer can also be regulated to suit the food being stored. Food retains its own moisture if stored at a higher humidity and so does not dry out as quickly. The temperature is approximately equivalent to the temperature in the fridge zone.
Storing food in the DailyFresh drawer Observe the following tips if you find that food you have stored does not keep well (e.g. food becomes limp or wilts after only being stored for a short time): Only place fresh food in the appliance. The initial condition of the food is crucial to maintaining freshness. Clean the DailyFresh drawer before storing food in it. Very wet food should be dried off before storing it.
Freezing and storing food Freezing fresh food Health risk caused by decomposing food. If the temperature in the freezer remains above -18 °C for a long time, the frozen food can start to defrost. This will reduce the storage life of the food. Check whether the frozen food has started to defrost. If it has, check that the food is safe to use and if it is, then use it as soon as possible or cook it before freezing it again.
Freezing and storing food Home freezing Before placing food in the freezer When freezing more than 2 kg of fresh food, switch on the SuperFreeze function for 6 hours before placing the food in the freezer. When freezing even larger amounts of food, switch on the SuperFreeze function for 24 hours before placing the food in the freezer. This helps the frozen food which is already stored in the freezer to stay frozen. Only freeze fresh food which is in a good condition.
Freezing and storing food Place the food flat in the bottom of the upper freezer drawers so that it freezes through to the core as quickly as possible. – VarioRoom: freezing the maximum amount of food (see data plate) If the ventilation slots are blocked, the cooling performance will decrease and energy consumption will increase. When placing food in the freezer, make sure that the ventilation slots are not blocked. Tip: You can expand the space available in the freezer section.
Freezing and storing food Cooling drinks quickly To cool drinks quickly in the refrigerator section, switch on the SuperCool function . If you want to cool a large amount of drinks, or if you want to cool drinks in the freezer section, select Party mode in Settings mode . When cooling drinks quickly in the freezer, make sure bottles are not left in for more than one hour. Otherwise they could burst.
Defrosting Refrigerator section and DailyFresh drawer The refrigerator section and the DailyFresh drawer defrost automatically. The condensate drains through a channel and drain hole into an evaporation system at the back of the refrigeration appliance. The warmth generated by the compressor causes the condensate to evaporate automatically. Keep the condensate channel and drain hole clean to enable this. Condensate must be able to drain away unhindered at all times.
Cleaning and care The data plate located inside the interior cabinet of the refrigeration appliance must not be removed. It contains information which is required in the event of a fault. Do not let water get into the electronic unit or the lighting. Risk of damage due to moisture ingress. The steam from a steam cleaner can damage plastic and electrical components. Do not use a steam cleaner to clean the refrigeration appliance. Cleaning water must not get into the drain hole.
Cleaning and care Preparing the refrigeration appliance for cleaning Cleaning the refrigerator section only: Switch Cleaning mode on. The cooling system in the refrigerator section is switched off, but the interior lighting remains switched on. Tap . Swipe left or right until is shown in the middle. Cleaning the freezer section/the entire refrigeration appliance: Switch the refrigeration appliance off. appears in the display and the cooling system is switched off.
Cleaning and care Cleaning the inside of the appliance Cleaning accessories by hand or in the dishwasher The refrigeration appliance should be cleaned regularly (at least once a month). The following components must be cleaned by hand only: If soiling is left on for any length of time, it may become impossible to remove under certain circumstances. Surfaces may suffer discolouration or damage. It is therefore best to remove any soiling immediately.
Cleaning and care - Shelves and bottle shelves in the appliance door (without stainless steel trim) - The guide rails for the door shelf with fine adjustment Dismantling the door shelf/bottle shelf Remove the stainless steel trim before cleaning the door shelf/bottle rack in a dishwasher. - Adjustable shelves (without the trim or printing) To remove the stainless steel trim, proceed as follows: - The glass shelves (without protective trims) Place the door shelf/bottle rack on the worktop.
Cleaning and care Dismantling the adjustable shelf/adjustable shelf with lighting Risk of damage as a result of incorrect cleaning. The stainless steel trim with LED lighting will be damaged if you place it in water for cleaning. Clean the stainless steel trim with LED lighting with a damp cloth. Remove the stainless steel trim or stainless steel trim with LED lighting before cleaning the adjustable shelf. Place the adjustable shelf on a worktop covered with a soft material (e.g.
Cleaning and care Removing the drawers from the fridge zone Pull the drawer out as far as it will go. The drawer is clipped into place at the back. It must be unclipped for removal. Push the drawer firmly into the refrigeration appliance until you hear it click into place. Removing the dividing plate Remove the dividing plate. Take hold of the sides of the drawer with both hands and pull the drawer up and towards you to unclip it. Do the same on the opposite side.
Cleaning and care Holding the sides of the drawer at the back, lift it up and then forwards and out. Removing the telescopic rails from the glass shelf Push the telescopic rails back in again to avoid damaging them. Replacing the drawer Place the drawer on the fully retracted telescopic rails. Push the drawer into the freezer section until it clicks into position. Removing the bottom drawer Pull the drawer forwards and out. Removing the glass shelf Pull the glass shelf and telescopic rails out.
Cleaning and care After cleaning the shelf, reattach the protective trim. Remove both charcoal filters and place the new filters with the surrounding edge pointing downwards in the holder. To attach the telescopic rails to the shelf: 1. Hook the telescopic rail on at the rear. 2. Then clip the catches into position at the front. Replacing the charcoal filters (optional accessories) Replace the charcoal filters in the holder every 6 months.
Cleaning and care Cleaning the door seal Risk of damage as a result of incorrect cleaning. If you treat the door seal with oils or grease, it can become porous. Do not use any oils or grease on the door seal. The door seal should be cleaned regularly with clean water, and then wiped dry with a soft cloth. Cleaning the ventilation gaps A build-up of dust will increase the energy consumption of the appliance.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. You can save time and money in many cases, as you do not need to call the Miele Customer Service Department. Information to help you rectify faults yourself can be found at www.miele.com/service. The following tables are designed to help you to find the cause of a malfunction or a fault and to resolve it.
Problem solving guide Problem Cause and remedy After a while, the temperature will return to normal by itself. The appliance doors are not closed properly. A thick layer of ice may have formed in the freezer section. Close the appliance doors. After a while, the temperature will return to normal by itself. If a thick layer of ice has already formed, this will affect cooling and increase energy consumption. Defrost the refrigeration appliance and clean it. The ambient temperature is too high.
Problem solving guide Problem Cause and remedy The compressor comes on less and less often and for shorter periods of time. The temperature in the refrigeration appliance rises. This is not a fault. The temperature setting is too high. Correct the temperature setting. Check the temperature again after 24 hours. The frozen food begins to defrost. The ambient temperature is too low for this refrigeration appliance. If the ambient temperature is too low, the compressor will run less frequently.
Problem solving guide Other problems Problem Cause and remedy The floor of the refriger- The condensate drain hole is blocked. ator section is wet. Clean the condensate channel and drain hole. Food has frozen together. The food packaging was not dry when placed in the freezer. Use a blunt instrument, e.g. a spoon handle or plastic scraper, to prise it apart carefully. There is no audible alarm even though the door has been open for a long time. This is not a fault.
Problem solving guide Display warnings Message Cause and remedy lights up on the start display, the refrigeration appliance does not get cold even though the controls and the interior lighting are working. Demo mode has been activated. Tap . Tap . Swipe left or right until is shown in the middle. Tap . is lit up on the display and the appliance cannot be used. The Cleaning mode function is still switched on.
Problem solving guide Message Cause and remedy The symbol lights up The charcoal filter change indicator on the start on the start display and display reminds you that the charcoal filter needs to a buzzer also sounds. be changed. Replace the charcoal filter in the holder (see “Cleaning and care – Replacing the charcoal filters (optional accessories)”) and touch the symbol on the display to confirm that you have changed the charcoal filter. The symbol will go out on the start display.
Problem solving guide Message Cause and remedy lights up red in the freezer section temperature display and an alarm also sounds. The temperature alarm has been activated; the temperature in the freezer section has risen higher or fallen lower than the temperature set. Possible reasons for this include: – The appliance door has been opened too frequently. – A large quantity of fresh food has been placed in the freezer without switching on the SuperFreeze function.
Problem solving guide Message Cause and remedy lights up red in the Indication of an interruption to the power supply: the temperature in the freezer section over the last few display and an alarm days or hours has risen too high because of a power also sounds. cut or interruption to the power supply. Tap . The fault message is confirmed: goes out and the alarm will stop.
Problem solving guide Message Cause and remedy There is a fault. Tap on the display to switch the alarm off. Call the Miele Customer Service Department. lights up red in the display and a fault code F with numbers may appear. An alarm will also sound. To report the fault, you need the fault code and also the model number and serial number of your refrigeration appliance. You can access this information on the display. To do this, touch on the display.
Problem solving guide The interior lighting is not working Risk of electric shock due to exposed, live electrical components. When removing the lighting cover, there is a risk of coming into contact with live electrical components. Do not remove the lighting cover. The LED lighting may only be repaired or replaced by the Miele Customer Service Department. Risk of injury from LED lighting. This lighting corresponds to risk group RG 2. If the cover is defective, there is a risk of eye injury.
Problem solving guide Problem Cause and remedy The LED lighting on one The shelf has not been positioned correctly on the of the adjustable shelf supports. shelves is not working. Check that the shelf is positioned correctly on the shelf supports. The shelf has metal contacts at the front left corner which supply power to the LED lighting. Push the shelf in until it clicks into position. The LED lighting on the stainless steel trim is faulty. Replace the stainless steel trim with LED lighting.
Noises Normal noises What is causing them? Brrrrr ... A humming noise is made by the compressor. This noise can get louder for brief periods when the compressor switches on. Blubb, blubb ... A gurgling noise can be heard when the refrigerant circulates through the pipes. Click ... Clicking sounds occur whenever the thermostat switches the compressor on or off. Sssrrrrr ... You can sometimes just hear the sound of the fan inside the appliance. Crack ...
Service Information to help you rectify faults yourself and about Miele spare parts can be found at www.miele.com/service. Contact in the event of a fault In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department. You can book a Miele Customer Service Department call-out online at www.miele.com/service. Contact information for the Miele Customer Service Department can be found at the end of this document.
EU Conformity declaration Miele hereby declares that this fridgefreezer complies with Directive 2014/53/ EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.ie - For service, information, operating instructions etc: go to www.miele.ie/ domestic/customer-information-385.htm and enter the name of the product or the serial number Frequency band of the WiFi module 2.4000 GHz – 2.
UK Conformity declaration Miele hereby declares that this fridgefreezer complies with UK Radio Equipment Regulations 2017, as amended. The complete text of the UK declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk - For service, information, operating instructions etc: go to www.miele.co.uk and enter the name of the product or the serial number Frequency band of the WiFi module 2.4000 GHz – 2.
Copyrights and licences For the purpose of operating and controlling the communication module, Miele uses proprietary or third-party software that is not covered by open source licensing terms. This software/these software components are protected by copyright. The copyrights held by Miele and third parties must be respected. Furthermore, the communication module integrated in the appliance contains software components which are distributed under open source licence conditions.
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Level 4, 141 Camberwell Road Hawthorn East, VIC 3123 Tel: 1300 464 353 Internet: www.miele.com.au Ireland Miele Ireland Ltd. 2024 Bianconi Avenue Citywest Business Campus Dublin 24 Tel: (01) 461 07 10 Fax: (01) 461 07 97 E-Mail: info@miele.ie Internet: www.miele.
KFN 7764 D en-GB M.-Nr.
