User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Start display
- Adjusting the interior fittings
- Using the door shelf fine adjustment
- Repositioning the door shelf with fine adjustment
- Moving the door shelf/bottle shelf
- Clipping the egg trays on
- Adjusting or removing the bottle holder
- Moving the adjustable shelf/adjustable shelf with lighting
- Moving the pivotable glass shelf (FlexiTray)
- Moving the charcoal filters
- When storing very strong smelling food (e.g. very ripe cheese):
- Accessories supplied
- Optional accessories
- Switching on and off
- The correct temperature
- Using Super cool, Super freeze and Dynamic cooling
- Selecting further settings
- Explanation of the different settings
- Party mode
- Holiday mode
- Switching the lock function / on
- Deactivating the lock function / temporarily
- Switching the lock function / off completely
- Sabbath mode
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Changing the volume of the alarms and buzzers /
- Adjusting the display brightness
- Switching off Demo mode
- Resetting the settings to their default settings
- Information
- Charcoal filter change indicator
- Cleaning mode
- Explanation of the different settings
- Temperature and door alarm
- Storing food in the fridge zone
- Storing food in the DailyFresh drawer
- Freezing and storing food
- Making ice cubes
- Defrosting
- Cleaning and care
- Cleaning agents
- Preparing the refrigeration appliance for cleaning
- Cleaning the inside of the appliance
- Cleaning accessories by hand or in the dishwasher
- Removing and dismantling accessories for cleaning
- Removing and dismantling the water container
- Removing the door shelf with fine adjustment
- Dismantling the door shelf/bottle shelf
- Dismantling the adjustable shelf/adjustable shelf with lighting
- Dismantling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Assembling the adjustable shelf with pivotable glass shelf (FlexiTray)
- Removing the drawers from the fridge zone
- Replacing the drawers
- Removing the dividing plate
- Removing the compartment cover
- Removing the drawers and glass shelves from the freezer section
- Removing the drawer on telescopic rails
- Replacing the drawer
- Removing the bottom drawer
- Removing the glass shelf
- Removing the telescopic rails from the glass shelf
- Replacing the charcoal filters (optional accessories)
- Cleaning the ice cube tray
- Cleaning the door seal
- Cleaning the ventilation gaps
- After cleaning
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and licences
Cleaning and care
72
Dismantling the door shelf/bottle
shelf
Remove the stainless steel trim before
cleaning the door shelf/bottle rack in a
dishwasher.
To remove the stainless steel trim, pro-
ceed as follows:
Place the door shelf/bottle rack on
the worktop.
Press the latch out of the recess. The
entire section of stainless steel trim
will now come off the shelf.
After cleaning, reattach the stainless
steel trim to the shelf by following the
same procedure in reverse.
Dismantling the adjustable shelf/ad-
justable shelf with lighting
Risk of damage as a result of in-
correct cleaning.
The stainless steel trim with LED
lighting will be damaged if you place
it in water for cleaning.
Clean the stainless steel trim with
LED lighting with a damp cloth.
Remove the stainless steel trim or
stainless steel trim with LED lighting
before cleaning the adjustable shelf.
Place the adjustable shelf on a work-
top covered with a soft material (e.g.
a tea towel) with the top side facing
downward.
Risk of damage as a result of in-
correct handling.
When you remove the stainless steel
trim with LED lighting, the metal con-
tacts can be damaged.
These contacts in the front left
corner supply power to the LED
lighting. Ensure that you always
loosen the side on which the con-
tacts are not located first.