Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Selecting additional settings
- Temperature and door alarm
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings (refrigerator section)
- Adjusting the interior fittings (freezer section)
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently asked questions
- Causes of noises
- Service and warranty
- Water connection
- Electrical connection
- Installation information
- Installation and appliance dimensions
- Building in the appliance
- Before installing the appliance
- Preparing the niche
- Securing the covers
- Pushing the appliance into the niche
- Aligning the appliance
- Aligning the freezer drawer fronts
- Securing the appliance in the niche
- Remove the fixing bracket
- Fixing the fixing brackets to the cabinet doors
- Securing the cabinet fronts to the freezer drawers
- Securing the cabinet door to the refrigerator door
- Fitting the air filter and ventilation grille
The correct temperature
27
If, after this amount of time, the temper-
ature is too high or too low, you will
need to adjust it again.
Adjusting the temperature in the Per-
fectFresh zone
In the PerfectFresh zone the tempera-
ture is maintained between 32 °F (0
°C) and 37 °F (3 °C). However, if you
would like it to be warmer or colder,
e.g. when storing fish, you can adjust
the temperature slightly.
The preset temperature in the Per-
fectFresh zone is 5. If a setting of be-
tween 1 and 4 is selected, minus
temperatures may be reached, re-
sulting in food freezing.
Select a higher level.
Touch the On/Off sensor for the Su-
perFreeze function for approx. 5 sec-
onds.
The indicator light in the right-hand
side of the display will light up at this
time and after approx. 5 seconds S will
flash in the bottom (freezer section)
temperature display. MENU will light up
in the display. You are now in Settings
mode.
Touch one of the sensors for setting
the temperature in the freezer section
repeatedly until flashes in the bot-
tom temperature display.
Touch the Super sensor again.
The last selected setting lights up in the
display.
You can now adjust the temperature
from (lowest temperature) to
(highest temperature) by touching the
sensors for adjusting the temperature
in the freezer section.
Touch the Super sensor again to save
the setting.
Touch the on and off sensor for the
freezer section to exit Settings mode.
The newly set temperature for the Per-
fectFresh zone will gradually be
reached.