Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Selecting additional settings
- Temperature and door alarm
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings (refrigerator section)
- Adjusting the interior fittings (freezer section)
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently asked questions
- Causes of noises
- Service and warranty
- Water connection
- Electrical connection
- Installation information
- Installation and appliance dimensions
- Building in the appliance
- Before installing the appliance
- Preparing the niche
- Securing the covers
- Pushing the appliance into the niche
- Aligning the appliance
- Aligning the freezer drawer fronts
- Securing the appliance in the niche
- Remove the fixing bracket
- Fixing the fixing brackets to the cabinet doors
- Securing the cabinet fronts to the freezer drawers
- Securing the cabinet door to the refrigerator door
- Fitting the air filter and ventilation grille
Adjusting the interior fittings (refrigerator section)
46
Adjusting the door shelf / bot-
tle shelf
Risk of injury!
Only move the bottle shelves when
they are empty.
Lift up the door shelf / bottle shelf
and pull it forward to remove it.
Place the door shelf / bottle shelf at
any position again. Make sure that it
is properly and secure pushed back
into position.
Removing or moving the
shelves
Hold the shelf on both sides and raise
it slightly so that it can be lifted with
the catches over the guide at the
back.
Pull the shelf forward.
Remove the shelf or place it in the re-
quired position, with the catches en-
gaged at the back.
Make sure that the shelf is straight.
Please not that you will not be able
to remove the shelves if the appli-
ance doors can only open 95°.
Remove the locking pins from the
top of the hinges to adjust the angle.
Removing the glass plate
above the PerfectFresh Pro
zone
The glass plate above the PerfectFresh
zone can be removed for cleaning.
Carefully take hold of the glass plate
right and left from underneath and lift
it upwards and out.