Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Selecting additional settings
- Temperature and door alarm
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings (refrigerator section)
- Adjusting the interior fittings (freezer section)
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently asked questions
- Causes of noises
- Service and warranty
- Water connection
- Electrical connection
- Installation information
- Installation and appliance dimensions
- Building in the appliance
- Before installing the appliance
- Preparing the niche
- Securing the covers
- Pushing the appliance into the niche
- Aligning the appliance
- Aligning the freezer drawer fronts
- Securing the appliance in the niche
- Remove the fixing bracket
- Fixing the fixing brackets to the cabinet doors
- Securing the cabinet fronts to the freezer drawers
- Securing the cabinet door to the refrigerator door
- Fitting the air filter and ventilation grille
Frequently asked questions
69
Messages in the display
Message Possible cause and solution
Dashes are flashing in
the temperature display.
Only temperatures within the range of the appliance
temperature will be displayed.
Check the temperature in the display about
6hours after switching the appliance on.
“F0toF5” appears in
the display.
There is a fault.
Contact Miele Technical Service.
The symbol lights up
in the display. You can-
not switch the appli-
ance off.
The safety lock has been activated.
Completely deactivate the safety lock (see “Select-
ing additional settings”, section “Activating and de-
activating the safety lock”).
The air filter indicator
light lights up in the
control panel.
This is a reminder to clean the air filter in the appli-
ance plinth.
Clean the air filter (see “Cleaning and care”). The
reset the indicator light via Settings mode (see
“Cleaning and care - Confirm cleaning of air filter).
When the ice cube
maker is turned on, the
indicator light for the
ice cube maker
flashes in the control
panel.
The water intake is not open.
Open the water intake.