Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Selecting additional settings
- Temperature and door alarm
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings (refrigerator section)
- Adjusting the interior fittings (freezer section)
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently asked questions
- Causes of noises
- Service and warranty
- Water connection
- Electrical connection
- Installation information
- Installation and appliance dimensions
- Building in the appliance
- Before installing the appliance
- Preparing the niche
- Securing the covers
- Pushing the appliance into the niche
- Aligning the appliance
- Aligning the freezer drawer fronts
- Securing the appliance in the niche
- Remove the fixing bracket
- Fixing the fixing brackets to the cabinet doors
- Securing the cabinet fronts to the freezer drawers
- Securing the cabinet door to the refrigerator door
- Fitting the air filter and ventilation grille
Building in the appliance
*INSTALLATION*
99
Aligning the appliance
Align the appliance at the front via
adjustable feet using the spanner
supplied, so that it stands upright.
Also align the appliance at the back
by moving adjusting rods with a
screwdriver or with the hexagonal key
supplied, until it is standing straight.
Caution! Risk of tipping over.
The adjustable feet must stand on
the floor, otherwise the appliance
could tip forwards!
Aligning the freezer drawer
fronts
The freezer drawer fronts can be
aligned if necessary.
Side view of freezer drawer pulled out
Move the screws on the right- and
left-hand sides of the freezer drawers
into the slots below.
Align the drawer front.
Now tighten the screws.