User manual

Installation
*INSTALLATION*
19
Installing several refrigeration
appliances
 Risk of damage due to condens-
ation on external appliance panels.
In environments with high humidity,
condensation can build up between
the external refrigeration appliance
panels, which can cause corrosion.
Do not place different refrigeration
appliances directly next to one an-
other.
Changing the door hinging
 Danger of injury and damage
when changing the door hinging.
There is an increased danger of in-
jury and damage if the door hinging
is installed by a single person.
Always change the door hinging with
the help of a second person.
The refrigeration appliance is supplied
with hinges on the right. If left-hand
hinging is required, the hinges must be
changed (see accompanying installation
instructions).
Fitting the wall spacers
The wall spacers on the back of your
refrigeration appliance ensure that heat
can ideally be diverted away from the
appliance.
 Slide the provided wall spacers into
the holders on the left and right of the
rear appliance panel.
The wall spacers must be used in or-
der to achieve declared energy con-
sumption values. Fitting wall spacers
increases the depth of the refrigeration
appliance by approx.36mm.
If the wall spacers are not used, the
functionality of the refrigeration appli-
ance is not affected. Energy consump-
tion is only slightly increased with less
distance between the appliance and
the wall.
 Risk of damage as a result of in-
correct handling.
The wall spacers must not be fitted
when the refrigeration appliance is
laid on its back.
Remove the wall spacers from the
back of the appliance in preparation.