User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super cool and Super freeze
- Using Eco mode
- Temperature and door alarm
- Storing food in the refrigerator section
- Storing food in the DailyFresh zone
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
Switching on and off
34
Before using for the first time
Remove all packaging material and
protective film.
Clean the inside of the appliance and
the accessories (see “Cleaning and
care”).
Allow the refrigeration appliance to
stand for approx. 1hour before con-
necting it to the power supply.
This will prevent potential functional
problems with the refrigeration appli-
ance.
Connecting the refrigeration appli-
ance
Connect the refrigeration appliance to
the electricity supply as described in
“Electrical connection”.
Switching the refrigeration ap-
pliance on
After you have connected the refrigera-
tion appliance to the electrical supply,
an alarm tone sounds and the temper-
ature alarm display in the freezer sec-
tion flashes.
Press the button for setting the tem-
perature in the refrigerator section
or the freezer section.
The alarm tone will stop.
The refrigeration appliance will start
cooling and gradually reach the pre-set
temperatures.
To enable the temperature to get suf-
ficiently cold inside the refrigeration
appliance, allow the appliance to run
for a few hours before placing food
in it. Do not place food in the refri-
geration appliance until it has
reached the preset temperature.
Do not place food in the freezer zone
until it has reached the preset tem-
perature (min. -18°C).
Switching off the refrigeration appli-
ance
Disconnect the power supply.
The cooling and interior lighting are
switched off.