Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Specifications for the mains water connection
- Building-in dimensions
- Dimensions of front panels
- Installing the appliance
- Before starting ...
- Tools required
- Weight of the furniture fronts
- Aligning the building-in niche
- Checking the installation niche
- Before installation
- Preparing the building-in niche
- Pushing the refrigeration appliance into the building-in niche
- Aligning the refrigeration appliance
- Securing the refrigeration appliance in the building-in niche
- Preparing to install the front panels
- Securing and aligning the furniture fronts
- Mounting the fixing brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance doors
- Mains water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- Switching / on or off
- Switching on or off
- Performing a
- Switching on and off
- Switching on the
- Switching off the
- Miele@home
- Switching off the
- Resetting the settings to their default settings
- Switching mode on or off
- Switching on or off
- Switching on, switching off or resetting the
- Switching on, switching off or resetting the
- The correct temperature
- Using Super cool and Super freeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Selecting additional settings
83
Switching on, switching off or
resetting theWater filter dis-
play
Depending on the quantity of ice cubes
produced, the Water filter display will re-
mind you approx. every 6months that
the IntensiveClear mesh filter has to be
cleaned. Clean the water filter appears on
the display.
See “Water filter (IntensiveClear mesh
filter)” in “Cleaning and care” for in-
structions on how to clean the water fil-
ter (IntensiveClear mesh filter).
The first time the mesh filter needs to
be cleaned, the display will remind you
automatically; the reminder does not
need to be switched on separately.
Switching the Water filter display
on
If theWater filter display has been
switched off, it must be switched on
again if required.
In Settings mode, use the
and sensor controls to selectWater
filter display and selectOK to confirm
your selection.
Use the and sensor controls to
select On and select OK to confirm
your selection.
The Water filter display is now switched
on.
Switching the Water filter display
off
In Settings mode, use the
and sensor controls to selectWater
filter display and selectOK to confirm
your selection.
Use the and sensor controls to
select Off and select OK to confirm
your selection.
TheWater filter display has been switched
off.