Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Specifications for the mains water connection
- Building-in dimensions
- Dimensions of front panels
- Installing the appliance
- Before starting ...
- Tools required
- Weight of the furniture fronts
- Aligning the building-in niche
- Checking the installation niche
- Before installation
- Preparing the building-in niche
- Pushing the refrigeration appliance into the building-in niche
- Aligning the refrigeration appliance
- Securing the refrigeration appliance in the building-in niche
- Preparing to install the front panels
- Securing and aligning the furniture fronts
- Mounting the fixing brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance doors
- Mains water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- Switching / on or off
- Switching on or off
- Performing a
- Switching on and off
- Switching on the
- Switching off the
- Miele@home
- Switching off the
- Resetting the settings to their default settings
- Switching mode on or off
- Switching on or off
- Switching on, switching off or resetting the
- Switching on, switching off or resetting the
- The correct temperature
- Using Super cool and Super freeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Selecting additional settings
84
Resetting the Water filter display
After you have cleaned the water filter,
you must reset the Water filter display so
that it will be displayed automatically
again after 6months.
If you do not reset the display, it ap-
pears again and again.
In Settings mode, use the
and sensor controls to selectWater
filter display and selectOK to confirm
your selection.
Use the and sensor controls to
select Reset and select OK to confirm
your selection.
The message Clean the water filter will
disappear from the display.
The Water filter display is now activated
for the next time the water filter requires
cleaning.
Switching on, switching off or
resetting theDisplay Active
AirClean filter
The Display Active AirClean filter will re-
mind you approx. every 6months that
the Active AirClean filters have to be re-
placed. Change Active AirClean filter will
appear on the display.
See “Cleaning and care – Replacing the
Active AirClean filters” for instructions
on how to replace the Active AirClean
filters.
The first time the Active AirClean filters
need to be replaced, the display will
remind you automatically; the re-
minder does not need to be switched
on separately.