Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Specifications for the mains water connection
- Building-in dimensions
- Dimensions of front panels
- Installing the appliance
- Before starting ...
- Tools required
- Weight of the furniture fronts
- Aligning the building-in niche
- Checking the installation niche
- Before installation
- Preparing the building-in niche
- Pushing the refrigeration appliance into the building-in niche
- Aligning the refrigeration appliance
- Securing the refrigeration appliance in the building-in niche
- Preparing to install the front panels
- Securing and aligning the furniture fronts
- Mounting the fixing brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance doors
- Mains water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- Switching / on or off
- Switching on or off
- Performing a
- Switching on and off
- Switching on the
- Switching off the
- Miele@home
- Switching off the
- Resetting the settings to their default settings
- Switching mode on or off
- Switching on or off
- Switching on, switching off or resetting the
- Switching on, switching off or resetting the
- The correct temperature
- Using Super cool and Super freeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Selecting additional settings
85
Switching the Display Active AirClean
filter on
If theDisplay Active AirClean filter has
been switched off once, it must be
switched on again if required.
In Settings mode, use the
and sensor controls to selectDis-
play Active AirClean filter and selectOK
to confirm your selection.
Use the and sensor controls to
select On and select OK to confirm
your selection.
The Display Active AirClean filter has been
switched on.
Switching the Display Active AirClean
filter off
If you do not require the Display Active
AirClean filter, you can switch it off.
In Settings mode, use the
and sensor controls to selectDis-
play Active AirClean filter and selectOK
to confirm your selection.
Use the and sensor controls to
select Off and select OK to confirm
your selection.
TheDisplay Active AirClean filter has been
switched off.
Resetting the Display Active AirClean
filter
After you have replaced the Active
AirClean filters, you must reset the Dis-
play Active AirClean filter so that it can be
displayed again after 6months.
If you do not reset the display, it ap-
pears again and again.
In Settings mode, use the
and sensor controls to selectDis-
play Active AirClean filter and selectOK
to confirm your selection.
Use the and sensor controls to
select Reset and select OK to confirm
your selection.
The message Change Active AirClean filter
will disappear from the display.
The Display Active AirClean filter to replace
the Active AirClean filters has been ac-
tivated.