Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super cool
- Door alarm
- Selecting further settings
- Storing food in the refrigerator section
- Adjusting the interior fittings
- Freezing and storing food (depending on model)
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
Installation
*INSTALLATION*
55
Appliance
furniture
door
thickness
A [mm]
Gap X [mm]
for different
edge radiiB
R0 R1.2 R2 R3
≥16–19 min. 3
20 5 4 4 3.5
21 5.5 5 4.5 4
22 6.5 6 5.5 5
Adjoining kitchen furniture front
A=Furniture front thickness
B=Edge radius
X=Gap
Adjoining side wall
A=Furniture front thickness
B=Edge radius
X=Gap
Tip: Fit a spacer between the housing
unit carcase and the side wall. This way
you will get a sufficiently wide gap.
Weight of the furniture door
If the furniture door panel is too
heavy, this can cause damage.
Fitting a furniture door panel which is
heavier than the maximum permitted
weight could damage the hinges.
This can cause subsequent func-
tional problems.
Before fitting a furniture door, ensure
that the weight of the door does not ex-
ceed the maximum permitted:
Appliance Maximum weight
of furniture door in
kg
K 31222 Ui 10kg
K 31242 UiF 10kg