Operating instructions/Installation instructions

Table Of Contents
The correct temperature
41
Temperature display
In normal operation, the temperature
display shows the current average
refrigerator section temperature in-
side the refrigeration appliance.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this tem-
perature to then be shown as a con-
stant temperature on the display.
Setting the temperature
Touch the OKsensor control on the
control panel.
will appear in the display.
Touch OK.
Use the andsensor controls to
change the temperature.
Touch OK.
The temperature display changes back
to the actual temperature that is cur-
rently in the refrigeration appliance.
Possible temperature settings
- Refrigerator section: 3to9°C
Adjusting the temperature in the
PerfectFresh Pro zone
The temperature in the PerfectFresh Pro
zone is automatically maintained
between 0and 3°C.
However, if you would like it to be
warmer or colder, e.g. when storing
fish, you can adjust the temperature
slightly in increments.
In Settings mode, use the or
sensor control to scroll to the
symbol.
Tap OK.
Use the and sensor controls to
select a setting between 1 (lowest
temperature) and 9 (highest temperat-
ure).
Tap OK.
The default setting for the temperat-
ure is5.
Under certain circumstances, a set-
ting from1 to4 can cause negative
temperatures to be reached. This can
cause food to freeze.
Check the temperature setting.