User manual

Selecting further settings
47
Deactivating or activating the WiFi
connection
 Tap.
 Swipe left or right until is shown in
the middle.
 Tap.
 Tap to deactivate the WiFi connec-
tion.
will appear on the display.
 Tap to reactivate the WiFi connec-
tion.
 Tap to exit the menu level.
When the WiFi connection is active, 
will light up on the start display.
Resetting the network configuration
 Tap.
 Swipe left or right until is shown in
the middle.
 Tap.
 Swipe right until is shown in the
middle.
 Tap.
 TapOK.
All entered settings and values for
Miele@home are reset to the default
settings.
The WiFi connection has been deactiv-
ated.  will go out on the start display.
Reset the network configuration if
you are disposing of or selling your
refrigeration appliance, or if you are
putting a used refrigeration appliance
into operation. All personal data is
removed from the refrigeration appli-
ance. This will also ensure that a pre-
vious owner is no longer able to ac-
cess the refrigeration appliance.
Changing the volume of the alarms
and buzzers/
You can change the volume of the
alarms and buzzers (e.g. in the event of
a door alarm or a fault message). Al-
ternatively, you can switch the alarms
and buzzers off if you find them annoy-
ing.
 Tap.
 Swipe left or right until is shown in
the middle.
 Tap.
 Select the volume you want by swip-
ing the segment bar to the left or
right.
 Confirm the volume you want by tap-
ping on the segment bar.
When the alarms and buzzers are
switched off, will appear.