Operating instructions Refrigerator To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Contents Warning and Safety instructions...................................................................... 5 Caring for the environment .............................................................................. 15 Installation.......................................................................................................... Installation site..................................................................................................... Side-by-side combinations ........................
Contents Switching on and off ......................................................................................... Before using for the first time .............................................................................. Connecting the refrigeration appliance .......................................................... Filling and inserting the water container for the humidifier ............................ Switching the refrigeration appliance on.....................................................
Contents Dry compartment ................................................................................................ 57 Defrosting........................................................................................................... 59 Cleaning and care ............................................................................................. Cleaning agents...................................................................................................
Warning and Safety instructions This refrigeration appliance complies with current safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Please read the operating and installation instructions carefully before using the refrigeration appliance for the first time. They contain important information on safety, installation, use and maintenance. This is to protect yourself from injury, and from damaging your refrigeration appliance.
Warning and Safety instructions Correct application This refrigeration appliance is intended for use in the home and in similar environments, for example – in shops, offices and similar work settings – by the guests in hotels, motels, bed & breakfasts and other typical home settings. This refrigeration appliance is not intended for outdoor use. This appliance is intended for domestic use only for cooling and storing food and drink. It must not be used for any other purpose.
Warning and Safety instructions Children must not be allowed to clean or maintain the appliance unsupervised. Please supervise children in the vicinity of the appliance and do not let them play with it. Danger of suffocation! Whilst playing, children could become entangled in packaging (such as plastic wrapping) or pull it over their head and suffocate. Keep packaging material away from children. Technical safety The coolant circuit has been checked for leaks.
Warning and Safety instructions - Ventilate the room where the refrigeration appliance is located for several minutes. - Contact the Miele Customer Service Department. The more refrigerant there is in a refrigeration appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of a combustible gas/ air mixture building up. For every 8 g of refrigerant at least 1 m3 of room space is required.
Warning and Safety instructions If the electrical connection cable supplied is damaged, it must only be replaced by an original spare part to prevent a hazard for the user. Miele can only guarantee the safety of the appliance when original Miele spare parts are used. Do not connect the appliance to the mains electrical supply by a multi-socket adapter or extension lead. These are a fire hazard and do not guarantee the required safety of the appliance.
Warning and Safety instructions This refrigeration appliance is supplied with a special lamp to cope with particular conditions (e.g. temperature, moisture, chemical resistance, abrasion resistance and vibration). This lamp must only be used for the purpose for which it is intended. The lamp is not suitable for room lighting. Replacement lamps may only be fitted by a Miele authorised technician or by the Miele Customer Service Department.
Warning and Safety instructions Risk of fire and explosion. Do not store explosive materials in the refrigeration appliance or any products containing propellants (e.g. spray cans). Electrical components can cause flammable mixes of gases to ignite. Danger of explosion. Do not operate any electrical equipment (e.g. an electric ice-cream maker) inside the refrigeration appliance. Danger of sparking and explosion.
Warning and Safety instructions Cleaning and care Do not use any oils or grease on the door seals, as these will cause the seals to deteriorate and become porous with time. Do not use a steam cleaning appliance to clean or defrost this appliance. Steam could reach electrical components and cause a short circuit. Sharp edged or pointed objects will damage the evaporator, causing irreversible damage to the appliance.
Warning and Safety instructions Transport Always transport the appliance in an upright position and in its original transport packaging to avoid damage in transit. Danger of injury and damage to the appliance. The refrigeration appliance is very heavy and must be transported by two people. Disposal of your old appliance Children playing could become trapped in the appliance and could suffocate. - Remove the appliance doors. - Remove the drawers.
Warning and Safety instructions Splashes of coolant can damage the eyes. Be careful not to damage any part of the pipework whilst awaiting disposal, e.g. by - puncturing the coolant channels in the condenser, - bending any pipework, or - scratching the surface coating. Symbol on the compressor (depending on model) This information is only relevant for recycling. There is no risk during normal operation. The oil in the compressor can be fatal if swallowed or if it penetrates the airways.
Caring for the environment Disposal of the packing material Disposing of your old appliance The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electrical and electronic appliances contain many valuable materials. They also contain certain materials, compounds and components which were essential for their correct functioning and safety.
*INSTALLATION* Installation Installation site Risk of damage and danger of injury due to the refrigeration appliance tipping over. This refrigeration appliance is very heavy and can tip forwards when the appliance door is open. Keep the appliance door(s) closed until the refrigeration appliance has been built in. The refrigeration appliance must be secured in its buildingin niche in accordance with the operating and installation instructions.
*INSTALLATION* Installation Risk of damage due to high hu- Climate range midity. In environments with high humidity, condensation can build up on external refrigeration appliance panels. This condensate can cause corrosion on external appliance panels. Install the refrigeration appliance in a dry and/or air-conditioned room with sufficient ventilation.
*INSTALLATION* Installation Ventilation Risk of fire and damage due to insufficient ventilation. If the refrigeration appliance is not ventilated sufficiently, the compressor will run more frequently and for longer periods. This will result in increased energy consumption and a higher operating temperature for the compressor. This may, in turn, cause damage to the compressor. Please ensure that there is adequate ventilation around the refrigeration appliance.
*INSTALLATION* Installation Appliance furniture door thickness A [mm] Weight of the furniture door Gap X [mm] for different edge radiiB R0 ≥16–19 R1.2 R2 If the furniture door panel is too R3 min. 3 20 5 4 4 3.5 21 5.5 5 4.5 4 22 6.5 6 5.5 5 heavy, this can cause damage. Fitting a furniture door panel which is heavier than the maximum permitted weight could damage the hinges. This can cause subsequent functional problems.
*INSTALLATION* Installation Building-in dimensions Installation in a tall unit/side view All dimensions are given in mm. * The declared energy consumption was calculated in a 560 mm deep niche. The refrigeration appliance is fully functional in a 550 mm niche but the energy consumption will be slightly higher. Before installation, ensure the housing unit dimensions are the correct size.
*INSTALLATION* Installation Connections and ventilation All dimensions are given in mm. The specified ventilation cross-sections must be adhered to in order to ensure the correct functioning of the refrigeration appliance. a View from the front b Mains connection cable, length = 2200 mm A longer mains connection cable is available to order from the Miele Customer Service Department. c Ventilation cross-section min.
*INSTALLATION* Installation Limiting the opening angle of the appliance door The door hinges are set ex works to enable the appliance door to be opened wide. If the opening angle of the appliance door needs to be limited to approx. 90°, the hinge can be adjusted to accommodate this. The locking pins for limiting the door opening must be fitted before the refrigeration appliance is installed. Insert the locking pins supplied for limiting the door opening into the hinges from above.
*INSTALLATION* Installation Electrical connection The refrigeration appliance must only be connected to an earthed socket using the mains connection cable supplied. The socket must be easily accessible after the refrigeration appliance has been installed. If the socket is not easily accessible, ensure that a suitable means of disconnection is provided on the installation side for each pole. Risk of fire from overheating.
*INSTALLATION* Installation Connecting the refrigeration appliance Insert the plug connector into the socket at the back of the refrigeration appliance. Make sure that the plug connector has clicked into position correctly. Insert the plug of the refrigeration appliance into the socket. The refrigeration appliance is now connected to the electricity supply.
Saving energy How to save energy: Installation site The refrigeration appliance has to cool more often at higher ambient temperatures and consumes more energy in the process. Therefore, you should: - Install the refrigeration appliance in a well-ventilated room. - Do not install the refrigeration appliance near to a heat source (heater element, cooker). - Protect the refrigeration appliance from direct sunlight. - Ensure an ideal ambient temperature of 20 °C.
Guide to the appliance 26
Guide to the appliance a Display b Fan with lighting c Dry back wall d Adjustable shelf with lighting (FlexiLight 2.
Guide to the appliance Start display The touch display can be scratched by pointed or sharp objects, e.g. pens. Only touch the display with your fingers. If your fingers are cold, the touch display may not react.
Guide to the appliance Settings mode In Settings mode, you can select the following appliance functions and alter their settings to some extent: Symbol Function Factory default Switch the Party mode function on or off (see “Selecting further settings”) Off Switch the Holiday mode function on or off (see “Selecting further settings”) Off / Switch the system lock on or off (see “Selecting further settings”) (off) Switch the Sabbath mode function on or off (see “Selecting further setti
Guide to the appliance Change the display brightness (see “Selecting further settings”) Level 4 Change the temperature unit (°Celsius or °Fahrenheit) °C Switch the Demo mode function off (only visible when switched on) (see “Selecting further settings”) Off Reset to default settings (see “Selecting further settings”) –– Call up information (model designation and serial number) about your refrigeration appliance (see “Selecting further settings”) –– Switch on the reminder to change t
Guide to the appliance Adjusting the interior fittings Using the door shelf fine adjustment Use the fine adjustment if you need greater height clearance on the door shelf/bottle shelf. Repositioning the door shelf with fine adjustment Only move the door/bottle shelves in the appliance door when they are empty. You can change the height of the door shelf while it is loaded. Hold the door shelf in both hands, press the grey buttons on both sides under it and move it.
Guide to the appliance Moving the door shelf/bottle shelf Only move the door/bottle shelves in the appliance door when they are empty. Adjusting or removing the bottle holder The non-slip fins of the bottle holder make bottles more secure when you open and close the appliance door. Push the door/bottle shelves upwards, then remove them by pulling them forwards. Replace the door/bottle shelves at the required height. Clipping the egg trays on Clip the egg trays onto the rear edge of the door shelf.
Guide to the appliance Moving the adjustable shelf/adjustable shelf with lighting Using the storage drawer (CompactCase) The shelves can be adjusted according to the height of the food. The storage drawer (CompactCase) is suitable for storing small packets and tubes. However, it can also be moved down slightly to accommodate larger packets. Raise the shelf slightly at the front and pull it forwards a little. Lift it until the notches at the side are in line with the shelf supports.
Guide to the appliance Moving the storage drawer (CompactCase) Remove the drawer. Use both hands to raise the shelf and support slightly at the front 1.). Pull the shelf slightly forwards 2.) and lift it until the notches on the left and right are in line with the shelf supports. Moving the pivotable glass shelf (FlexiTray) Risk of damage caused by loading too much food and not distributing items evenly. Loading too much food and not distributing items evenly can damage the pivotable glass shelf.
Guide to the appliance Moving the bottle rack Using the bottle rack in the dividing plate In the dividing plate, either the bottle rack or the glass shelf can be used. The bottle rack can be placed at different positions in the refrigeration appliance. Raise the bottle rack slightly at the front, and pull it forwards a little until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level.
Guide to the appliance Inserting the adapters for the baking tray The supplied adapters enable you to insert a baking tray in your refrigerator section with ease. The baking tray can be no more than 466 mm wide, 386 mm deep and 50 mm high. Moving the charcoal filters KKF-FS charcoal filters with holder (Active AirClean) are available as optional accessories (see “Optional accessories”). When storing very strong smelling food (e.g.
Guide to the appliance Accessories supplied Adjustable shelf with pivotable glass shelf (FlexiTray) Adapters for the baking tray KKF-FS charcoal filter with holder (Active AirClean) Charcoal filters neutralise unpleasant odours in the refrigerator section for improved air quality. Egg tray KKF-RF replacement charcoal filters (Active AirClean) Bottle holder Replacement filters to the fit the holder are available. We recommend replacing the charcoal filters every 6 months.
Switching on and off Before using for the first time Remove all packaging material and protective film. Clean the inside of the appliance and the accessories (see “Cleaning and care”). Connecting the refrigeration appliance Connect the refrigeration appliance to the electricity supply as described in “Electrical connection”. will then appear on the appliance display, followed by .
Switching on and off To note when switching off for longer periods of time If, during a long absence, the refrigeration appliance is switched off but not cleaned and the door is left shut, there is a danger of mould building up inside the appliance. It is essential to clean the refrigeration appliance. If the refrigeration appliance is not going to be used for a longer period of time, observe the following: Switch the refrigeration appliance off.
The correct temperature It is very important to set the correct temperature to ensure the shelf life of food. Reducing the temperature reduces the growth rate of microorganisms. Food does not spoil as quickly. The temperature in the refrigeration appliance will rise: - The more often the appliance door is opened and the longer it is kept open - The more food that is stored in it - The warmer the food is which is being put into it - The higher the ambient temperature surrounding the refrigeration appliance.
The correct temperature Temperature display In normal operation, the temperature display shows the current average refrigerator section temperature inside the refrigeration appliance. Depending on the ambient temperature and the temperature setting, it can take the appliance a few hours to reach the temperature required and for this temperature to then be shown as a constant temperature on the display. Setting the temperature Touch the temperature display on the display. Tap .
Using Super cool SuperCool When switched on, the SuperCool function can be used to rapidly reduce the temperature in the fridge zone to its lowest setting (depending on the ambient temperature). The refrigeration appliance will work at full power and lower the temperature. Select this function for the rapid chilling of large amounts of fresh food or drink. When the SuperCool function is switched on, the appliance may make more noise than usual.
Selecting further settings Explanation of the different settings Only the settings that require further explanation are described below. The door alarm and other warnings are automatically suppressed when you are in Settings mode . Party mode The Party mode function is particularly recommended for the rapid chilling of large amounts of fresh food or drink. Tip: Switch on the Party mode function approx. 4 hours before placing food and drinks in the appliance.
Selecting further settings Health risk caused by decom- Now select the required settings. posing food. The usability and quality of food in the fridge zone may deteriorate if the temperature remains above 4 °C for an extended period. Only ever switch on the Holiday mode function for a limited period. Do not store any temperature-sensitive food which goes off easily, such as fruit, vegetables, fish, meat and dairy products, during this time.
Selecting further settings Sabbath mode Health risk caused by decom- The refrigeration appliance offers a Sabbath mode for the purposes of religious observance. posing food. As power failures are not indicated while Sabbath mode is active, food may be exposed to increased temperatures for a certain period of time. This will reduce the storage life of the food. If there is a power failure during Sabbath mode , check the quality of the food.
Selecting further settings Changing the time before the door alarm is triggered You can set how quickly the door alarm should sound after an appliance door has been opened. Tap . Swipe left or right until is shown in the middle. Tap . Swipe left or right until the time you want between 30 seconds and 3 minutes 30 seconds is shown in the middle. Tap on the setting you want to confirm. Miele@home Your refrigeration appliance is equipped with an integrated WiFi module.
Selecting further settings Availability of the WiFi connection The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This can give rise to sporadic or even complete connection failures. Therefore, the availability of featured functions cannot be guaranteed. Miele@home availability The ability to use the Miele app depends on the availability of the Miele@home service in your country. The Miele@home service is not available in every country.
Selecting further settings Resetting the network configuration Tap . Swipe left or right until is shown in the middle. Tap . Swipe right until is shown in the middle. Tap . Tap OK. All entered settings and values for Miele@home are reset to the default settings. The WiFi connection has been deactivated. will go out on the start display.
Selecting further settings Switching off Demo mode Demo mode allows the refrigeration appliance to be presented in the showroom without the cooling system being switched on. This setting is not needed for domestic use. If Demo mode has been switched on as a default setting, will show on the start display. Tap . Tap . Swipe left or right until is shown in the middle. Tap . After Demo mode has been switched off, the refrigeration appliance shuts down and must be switched on again.
Door alarm The refrigeration appliance is fitted with a warning system to avoid increased energy consumption and food becoming warm if the appliance door is left open. If the appliance door is left open for a longer period of time, will light up yellow in the temperature display. An alarm will also sound. You can change the time before the door alarm is triggered. However, the door alarm can also be turned off (see “Selecting further settings”).
Storing food in the fridge zone Risk of explosion due to flam- Different storage zones mable mixes of gases. Electrical components can cause flammable mixes of gases to ignite. Do not store explosive materials in the refrigeration appliance or any products containing propellants (e.g. spray cans). The spray cans in question can be identified by the contents printed on the can or by a flame symbol. Electrical components can cause escaping gases to ignite.
Storing food in the fridge zone Coldest area The coldest area in the fridge zone is directly above the PerfectFresh Active zone dividing plate and at the back of the appliance. The temperature in the PerfectFresh Active zone compartments is even colder. A temperature setting of 4 °C combined with appropriate hygiene measures delays the propagation of bacteria, e.g. salmonella and listeria, which can lead to serious food poisoning.
Storing food in the fridge zone Storing food correctly Ensure that food stored in the fridge zone is in packaging or covered properly (some exceptions apply in the PerfectFresh Active zone). This will prevent food odours from affecting other food, stop food from drying out and also prevent any cross-contamination of bacteria. This is particularly important when storing meat products. Make sure that food such as raw meat and fish in particular does not come into contact with other food.
Storing food in the PerfectFresh Active zone PerfectFresh Active zone The PerfectFresh Active zone satisfies the requirements of a chill compartment to DIN EN 62552:2020. The PerfectFresh Active zone provides ideal storage conditions for fruit, vegetables, fish, meat and dairy products. Food stays fresh considerably longer while retaining both flavour and vitamins. The temperature in the PerfectFresh Active zone is controlled automatically and maintained at 0 to 3 °C.
Storing food in the PerfectFresh Active zone Selecting increased humidity When the setting is used, the humidifier should be switched on. The energy consumption does increase slightly when the humidifier is switched on. The appliance may also make more noise than usual. Tap . Swipe left or right until is shown in the middle. Tap . Swipe left until the humidifier intensity you want (1: low humidity; 3: maximum humidity) is shown in the middle.
Storing food in the PerfectFresh Active zone Humidifier When the humidifier is switched on, water vapour is supplied to the fruit and vegetables stored in the humiditycontrolled compartment each time the appliance door is opened and approximately every 90 minutes. The water vapour provides additional humidity in the humidity-controlled compartment. The humidifier and its water container are located in the dividing plate between the refrigerator section and PerfectFresh Active zone.
Storing food in the PerfectFresh Active zone Filling the water container for the humidifier Dry compartment | The lower dry compartment has a temperature of 0 to 3 °C and the humidity is not increased . The dry compartment is ideal for storing food which goes off quickly, such as: - Fresh fish and shellfish - Meat, poultry and sausage Press on the outer corners at the back of the glass shelf . The glass shelf will lift up at the front. Lift up the shelf and fold it back.
Storing food in the PerfectFresh Active zone Observe the following tips if you find that food you have stored does not keep well (e.g. food becomes limp or wilts after only being stored for a short time): Only place fresh food in the appliance. The initial condition of the food is crucial to maintaining freshness. Clean the compartments in the PerfectFresh Active zone before storing food in them. Very wet food should be dried off before storing it.
Defrosting Refrigerator section and PerfectFresh Active zone The refrigerator section and the PerfectFresh Active zone defrost automatically. The condensate drains through a channel and drain hole into an evaporation system at the back of the refrigeration appliance. The warmth generated by the compressor causes the condensate to evaporate automatically. Keep the condensate channel and drain hole clean to enable this. Condensate must be able to drain away unhindered at all times.
Cleaning and care The data plate located inside the interior cabinet of the refrigeration appliance must not be removed. It contains information which is required in the event of a fault. Do not let water get into the electronic unit or the lighting. Risk of damage due to moisture ingress. The steam from a steam cleaner can damage plastic and electrical components. Do not use a steam cleaner to clean the refrigeration appliance. Cleaning water must not get into the drain hole.
Cleaning and care Preparing the refrigeration appliance for cleaning Cleaning the inside of the appliance Tip: Switch Cleaning mode on. The cooling in the fridge zone is switched off, but the interior lighting remains switched on. The refrigeration appliance should be cleaned regularly (at least once a month). Tap . If soiling is left on for any length of time, it may become impossible to remove under certain circumstances. Surfaces may suffer discolouration or damage.
Cleaning and care Cleaning accessories by hand or in the dishwasher The following components must be cleaned by hand only: - The stainless steel trims or strips - Flexible bottle rack - Bottle holder, egg tray - Shelves and bottle shelves in the appliance door (without stainless steel trim) - The guide rails for the door shelf with fine adjustment - Door shelf with fine adjustment - Adjustable shelves (without the trim or printing) - The plastic parts of the adjustable shelf with pivotable glass shelf (
Cleaning and care Push the shelf back down onto the guide rails. Dismantling the door shelf/bottle shelf Remove the stainless steel trim before cleaning the door shelf/bottle rack in a dishwasher. To remove the stainless steel trim, proceed as follows: Place the door shelf/bottle rack on the worktop. Press the latch out of the recess. The entire section of stainless steel trim will now come off the shelf.
Cleaning and care Dismantling the adjustable shelf/adjustable shelf with lighting Risk of damage as a result of incorrect cleaning. The stainless steel trim with LED lighting will be damaged if you place it in water for cleaning. Clean the stainless steel trim with LED lighting with a damp cloth. Remove the stainless steel trim or stainless steel trim with LED lighting before cleaning the adjustable shelf. Place the adjustable shelf on a worktop covered with a soft material (e.g.
Cleaning and care Dismantling the adjustable shelf with pivotable glass shelf (FlexiTray) Danger of injury from dropping the glass shelf. The pivotable glass shelf can come out when removing the adjustable shelf, causing the glass shelf to drop out of the tray and break. Keep hold of the pivotable glass shelf when removing the adjustable shelf. Place the adjustable shelf with pivotable glass shelf on a worktop covered with a soft material (e.g. a tea towel).
Cleaning and care Release the retainers and lift the shelf up. The glass shelf comes loose. Both parts can now be cleaned. Place the frame on the adjustable shelf so that the arrows on the adjustable shelf line up with the recesses on the frame. Assembling the adjustable shelf with pivotable glass shelf (FlexiTray) Put the plastic adjustable shelf down on the worktop so that the recess is at the top and the stainless steel trim is at the front.
Cleaning and care Removing and dismantling the storage drawer (CompactCase) Pull off the supports from the sides of the shelf 1.). Pull the stainless steel trim forwards off the shelf 2.). Pull off the rear protective strip 3.). After cleaning the shelf, reattach the stainless steel trim, the protective strip and the supports. Pull the drawer out as far as it will go. Tilt the drawer slightly upwards and remove it. Use both hands to raise the shelf and support slightly at the front 1.).
Cleaning and care Removing the drawers from the fridge zone Removing and dismantling the water container for the humidifier Risk to health due to contamin- Pull the drawer out as far as it will go. Holding the sides of the drawer at the back, lift it up and then forwards and out. Push the telescopic rails back in again to avoid damaging them. Risk of damage as a result of incorrect cleaning.
Cleaning and care Remove the water container. Removing the dividing plate and bottle rack Remove the glass shelves at the front and back of the dividing plate. Separate the water container into its 2 pieces and clean them by hand or in the dishwasher. Reinsert the water container. Fold the glass shelf back down. Lift the bottle rack at the front and pull it out. After cleaning, slide the bottle rack all the way in and push it down. Place the glass shelves back on the dividing plate.
Cleaning and care Replacing the charcoal filters (optional accessories) Replace the charcoal filters in the holder every 6 months. The symbol on the start display reminds you that the charcoal filter needs to be changed. Replacement KKF-RF charcoal filters can be obtained from the Miele Customer Service Department, from your dealer or from Miele’s website. Pull the charcoal filter holder upwards to remove it from the adjustable shelf.
Cleaning and care After cleaning Switch the Cleaning mode function off again by tapping on on the start display. Tap again. When Cleaning mode is switched off, the symbol will light up white. The refrigeration appliance will start cooling again. Replace all shelves and accessories in the refrigeration appliance. Switch on the SuperCool function for a while so that the temperature inside the refrigeration appliance will drop quickly.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. You can save time and money in many cases, as you do not need to call the Miele Customer Service Department. Information to help you rectify faults yourself can be found at www.miele.com/service. The following tables are designed to help you to find the cause of a malfunction or a fault and to resolve it.
Problem solving guide Problem Cause and remedy After a while, the temperature will return to normal by itself. The appliance door is not properly closed. Close the appliance door. After a while, the temperature will return to normal by itself. The ambient temperature is too high. The higher the ambient temperature, the longer the compressor runs. See the information in “Installation – Installation site”. The refrigeration appliance was not properly installed in the niche.
Problem solving guide Other problems Problem Cause and remedy The floor of the refriger- The condensate drain hole is blocked. ator section is wet. Clean the condensate channel and drain hole. There is no audible alarm even though the door has been open for a long time. This is not a fault. The alarm has been switched off in Settings mode. If you want to switch the acoustic alarm back on again: Tap . Swipe left or right until is shown in the middle. Tap .
Problem solving guide Display warnings Message Cause and remedy lights up on the start display, the refrigeration appliance does not get cold even though the controls and the interior lighting are working. Demo mode has been activated. Tap . Tap . Swipe left or right until is shown in the middle. Tap . is lit up on the display and the appliance cannot be used. The Cleaning mode function is still switched on.
Problem solving guide Message Cause and remedy The symbol lights up The charcoal filter change indicator on the start on the start display and display reminds you that the charcoal filter needs to a buzzer also sounds. be changed. Replace the charcoal filter in the holder (see “Cleaning and care – Replacing the charcoal filters (optional accessories)”) and touch the symbol on the display to confirm that you have changed the charcoal filter. The symbol will go out on the start display.
Problem solving guide Problems with the humidifier Problem Cause and remedy The humidifier is not supplying moisture to the food in the PerfectFresh Active zone. The humidifier is not switched on. Tap on the symbol in Settings mode . The compartment cover has been pulled forwards to the “Humidity not increased ” setting. Push the compartment cover backwards so that the “Increased humidity ” setting is selected. There is not enough water in the water container.
Problem solving guide The interior lighting is not working Risk of electric shock due to exposed, live electrical components. When removing the lighting cover, there is a risk of coming into contact with live electrical components. Do not remove the lighting cover. The LED lighting may only be repaired or replaced by the Miele Customer Service Department. Risk of injury from LED lighting. This lighting corresponds to risk group RG 2. If the cover is defective, there is a risk of eye injury.
Problem solving guide Problem Cause and remedy The LED lighting on one The shelf has not been positioned correctly on the of the adjustable shelf supports. shelves is not working. Check that the shelf is positioned correctly on the shelf supports. The shelf has metal contacts at the front left corner which supply power to the LED lighting. Push the shelf in until it clicks into position. The LED lighting on the stainless steel trim is faulty. Replace the stainless steel trim with LED lighting.
Noises Normal noises What is causing them? Brrrrr ... A humming noise is made by the compressor. This noise can get louder for brief periods when the compressor switches on. Blubb, blubb ... A gurgling noise can be heard when the refrigerant circulates through the pipes. Click ... Clicking sounds occur whenever the thermostat switches the compressor on or off. Crack ... A cracking sound can be heard when materials expand inside the refrigeration appliance.
Service Information to help you rectify faults yourself and about Miele spare parts can be found at www.miele.com/service. Contact in the event of a fault In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department. You can book a Miele Customer Service Department call-out online at www.miele.com/service. Contact information for the Miele Customer Service Department can be found at the end of this document.
EU Conformity declaration Miele hereby declares that this refrigerator complies with Directive 2014/53/ EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.ie - For service, information, operating instructions etc: go to www.miele.ie/ domestic/customer-information-385.htm and enter the name of the product or the serial number Frequency band of the WiFi module 2.4000 GHz – 2.
UK Conformity declaration Miele hereby declares that this refrigerator complies with UK Radio Equipment Regulations 2017, as amended. The complete text of the UK declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk - For service, information, operating instructions etc: go to www.miele.co.uk and enter the name of the product or the serial number Frequency band of the WiFi module 2.4000 GHz – 2.
Copyrights and licences For the purpose of operating and controlling the communication module, Miele uses proprietary or third-party software that is not covered by open source licensing terms. This software/these software components are protected by copyright. The copyrights held by Miele and third parties must be respected. Furthermore, the communication module integrated in the appliance contains software components which are distributed under open source licence conditions.
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Level 4, 141 Camberwell Road Hawthorn East, VIC 3123 Tel: 1300 464 353 Internet: www.miele.com.au Ireland Miele Ireland Ltd. 2024 Bianconi Avenue Citywest Business Campus Dublin 24 Tel: (01) 461 07 10 Fax: (01) 461 07 97 E-Mail: info@miele.ie Internet: www.miele.
K 7793 C en-GB M.-Nr.
