User manual

Switching on and off
38
Before using for the first time
 Remove all packaging material and
protective film.
 Clean the inside of the appliance and
the accessories (see “Cleaning and
care”).
Connecting the refrigeration appli-
ance
 Connect the refrigeration appliance to
the electricity supply as described in
“Electrical connection”.
Miele will then appear on the appliance
display, followed by .
Filling and inserting the water con-
tainer for the humidifier
 Fill the water container for the humid-
ifier with fresh drinking water (see
“Storing food in the PerfectFresh Act-
ive zone – Humidity-controlled com-
partment”).
 Place the water container in the divid-
ing plate between the refrigerator
section and PerfectFresh Active zone
(see “Storing food in the PerfectFresh
Active zone – Humidity-controlled
compartment”).
Switching the refrigeration ap-
pliance on
 Open the appliance door.
 Tap on the display.
The refrigeration appliance will start to
cool and the interior lighting will come
on when the appliance door is opened.
The refrigeration appliance will adjust to
the preset temperature.
To enable the temperature to get suf-
ficiently cold inside the refrigeration
appliance, allow the appliance to run
for a few hours before placing food
in it. Do not place food in the refri-
geration appliance until it has
reached the preset temperature.
Switching off the refrigeration
appliance
 Touch the temperature display on the
display.
 Swipe right until is shown in the
middle.
 Tap.
The cooling and interior lighting are
switched off.
will appear in the display.
Please note: the refrigeration appli-
ance is not disconnected from the
power supply when it is switched off.