Operating instructions/Installation instructions

Table Of Contents
Installation
*INSTALLATION*
18
Door hinge
Risk of damage and injury when
changing the door hinge.
Changing the door hinge single-
handedly can cause damage to the
appliance and injury.
The wine conditioning unit is sup-
plied with fixed hinges. Under no cir-
cumstances should you attempt to
change the door hinges yourself.
If you need to change the door
hinges to the other side, please con-
tact the Customer Service Depart-
ment.
Side-by-side
This wine conditioning unit can be in-
stalled side-by-side with another wine
conditioning unit or refrigeration appli-
ance. The following overview will show
you which side-by-side installation op-
tions you have with your wine condi-
tioning unit.
Depending on the installation situ-
ation, you will need the side-by-side
installation kit for side-by-side installa-
tion (see “Accessories – Optional ac-
cessories”).
Instructions for installing appliances
side-by-side can be found in the side-
by-side installation kit installation in-
structions.
. . .with partition wall
The wall a between the side-by-side
wine conditioning units/refrigeration
appliances must be at least 16mm
thick.
If the door hinges of the appliances
are next to each other, you must take
into account the thickness of the fur-
niture fronts and door handles so
that the appliance doors do not col-
lide and become damaged if they are
opened at the same time.
The wine conditioning units/refrigeration
appliances are secured individually in
their building-in niche using the sup-
plied installation material.
If the partition wall a is narrower than
160mm, you will need the side panel
heater from the side-by-side installation
kit to prevent condensation from form-
ing and any resulting damage.