Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Building-in dimensions
- Dimensions of the furniture front
- Installing the wine conditioning unit
- Before starting ...
- Tools required
- Weight of the furniture front
- Aligning the building-in niche
- Checking the building-in niche
- Before installation
- Preparing the building-in niche
- Pushing the wine conditioning unit into the building-in niche
- Aligning the wine conditioning unit
- Securing the wine conditioning unit in the building-in niche
- Preparing to install the furniture fronts
- Securing and aligning the furniture front
- Mounting the fixing brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Fitting the door trim
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance door
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- The ideal temperature and humidity
- Door alarm
- Storing wine bottles
- SommelierSet
- Automatic defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Installation
*INSTALLATION*
45
Trim the long pieces of door trim for
the right and left sides to the length
required X.
Fit the door trim into the gap between
the furniture front and the glass.
Cut the short pieces of door trim for
the top and bottom of the door to the
length required Y.
Fit the door trim into the gap between
the furniture front and the glass.
Securing the plinth ventilation grille
and plinth panel
Click the plinth ventilation grille
onto the bottom of the plinth.
If necessary, cut the plinth panel to
the required length and height (cut
along the lower edge of the plinth
where it touches the floor).
Secure the plinth panel to the bottom
of the plinth ventilation grille.