Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Building-in dimensions
- Dimensions of the furniture front
- Installing the wine conditioning unit
- Before starting ...
- Tools required
- Weight of the furniture front
- Aligning the building-in niche
- Checking the building-in niche
- Before installation
- Preparing the building-in niche
- Pushing the wine conditioning unit into the building-in niche
- Aligning the wine conditioning unit
- Securing the wine conditioning unit in the building-in niche
- Preparing to install the furniture fronts
- Securing and aligning the furniture front
- Mounting the fixing brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Fitting the door trim
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance door
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- The ideal temperature and humidity
- Door alarm
- Storing wine bottles
- SommelierSet
- Automatic defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Selecting additional settings
63
In Settings mode, you can select dif-
ferent wine conditioning unit functions
and alter their settings to some extent,
allowing you to adjust the appliance to
suit your requirements.
Only the functions in Settings mode
that require further explanation are de-
scribed below.
The door alarm and other warnings
are automatically disabled when the
appliance is in Settings mode.
Switching Keypad lock/
on or off
Switch Keypad lock on if you wish to
protect your wine conditioning unit from
unwanted temperature changes or other
unintentional adjustments in Settings
mode.
In Settings mode, use the
and sensor controls to se-
lectKeypad lock and selectOK to con-
firm your selection.
Use the and sensor controls to
switch the sensor lock On or Off and
select OK to confirm your selection.
The sensor lock will not be activated
until you close the appliance door.
Nothing will appear on the display to in-
dicate that the sensor lock is switched
on.
The message Press OK for 6 seconds to
unlock will appear on the display if you
select a sensor control while the sensor
lock is switched on.
Follow the instructions on the display.
The display is unlocked briefly so you
can adjust the settings as required.
Closing the appliance door will reactiv-
ate the sensor lock.