Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Building-in dimensions
- Dimensions of the furniture front
- Installing the wine conditioning unit
- Before starting ...
- Tools required
- Weight of the furniture front
- Aligning the building-in niche
- Checking the building-in niche
- Before installation
- Preparing the building-in niche
- Pushing the wine conditioning unit into the building-in niche
- Aligning the wine conditioning unit
- Securing the wine conditioning unit in the building-in niche
- Preparing to install the furniture fronts
- Securing and aligning the furniture front
- Mounting the fixing brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Fitting the door trim
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance door
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- The ideal temperature and humidity
- Door alarm
- Storing wine bottles
- SommelierSet
- Automatic defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Cleaning and care
85
Before cleaning the wine con-
ditioning unit
Switch the wine conditioning unit off
by pressing the On/Off switch.
Take any wine bottles out of the wine
conditioning unit and store them in a
cool place.
Take out all other removable parts for
cleaning (see “Moving the wooden
shelves” in “Storing wine bottles”).
Remove the labelling strips from the
wooden shelves before cleaning them
(see “Labelling wooden shelves” in
“Storing wine bottles”).
Interior cabinet, accessories
and appliance door
Clean the wine conditioning unit at
least once a month.
Remove soiling immediately to pre-
vent it from drying on.
Clean the interior cabinet of the wine
conditioning unit with a solution of
lukewarm water and a little washing-
up liquid. Rinse all parts by hand. Do
not wash in a dishwasher.
After cleaning, wipe with clean water
and dry with a soft cloth.
Risk of damage due to incorrect
cleaning.
The blackboard coating on the la-
belling strips may be damaged.
Use clean water only to wipe the la-
belling strips on the wooden shelves.
Do not use a cleaning agent.
The wooden shelves should only be
wiped with a well wrung-out damp
cloth. They must not be allowed to
get wet.
Leave the wine conditioning unit open
to air it sufficiently for a short while
and to prevent odour build-up.
Clean the glass panes in the appli-
ance door with glass cleaner.