Operating instructions/Installation instructions

Problem solving guide
87
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
To prevent cold from escaping, open the appliance as little as possible until the
fault has been corrected.
Problem Cause and remedy
If you are concerned
that your wine condi-
tioning unit is not work-
ing properly, you can
perform a Self test. Your
wine conditioning unit
will be checked for any
faults or malfunctions.
Any errors identified during the self test are shown on
the display.
 Perform a self test (see “Performing a Self test”
in “Additional settings”).
 If necessary, contact the Customer Service De-
partment and inform them of the error message(s)
on the display.
The wine conditioning
unit is not getting cold
and the interior lighting
does not come on when
the appliance door is
opened.
The wine conditioning unit is not switched on.
 Switch the wine conditioning unit on. The temper-
ature appears on the display.
The plug is not inserted in the socket correctly.
 Insert the plug into the socket.
The mains fuse has tripped. There could be a fault
with the wine conditioning unit, the household elec-
trical wiring or another electrical appliance.
 Contact a qualified electrician or the Miele Cus-
tomer Service Department.
The compressor is
switching on more fre-
quently and for longer
periods of time. The
temperature in the wine
conditioning unit is too
low.
The temperature in the wine conditioning unit is set
too low.
 Correct the temperature setting.
The ventilation gaps in the housing unit have been
covered or become too dusty.
 Do not block the ventilation gaps.
 Dust the ventilation gaps regularly.
The appliance door has been opened too frequently,
or a large number of wine bottles have been put in-
side the unit all at once.