Operating instructions Heat pump dryer To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Contents Caring for the environment ............................................................................. 5 Warnings and safety instructions ................................................................... 6 Operating the tumble dryer .............................................................................. 18 Control panel ....................................................................................................... 18 How the sensor controls work ..............................
Contents Condensed water container ............................................................................. 35 Emptying the condensed water container .......................................................... 35 Fragrance flacon................................................................................................ FragranceDos ...................................................................................................... Removing the protective seal from the fragrance flacon............
Contents Installation.......................................................................................................... Front view ............................................................................................................ Rear view............................................................................................................. Transporting the tumble dryer .............................................................................
Caring for the environment Disposal of the packing material Disposing of your old appliance The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electronic and electrical appliances contain many valuable materials. They also contain certain materials, compounds and components which were essential for their correct functioning and safety.
Warnings and safety instructions It is essential to read these instructions. This tumble dryer contains a refrigerant that is flammable and explosive. This tumble dryer complies with all current local and national safety requirements. However, inappropriate use can lead to personal injury and damage to property. Read the operating instructions carefully before using the tumble dryer. They contain important information on safety, installation, use and maintenance.
Warnings and safety instructions Correct application This tumble dryer is intended for use in domestic households and similar working and residential environments. This tumble dryer is not intended for outdoor use. It must be used only as a domestic appliance to dry items which have been washed in a water solution and which are marked on the manufacturer's care label as being suitable for tumble drying.
Warnings and safety instructions Technical safety Before setting up the tumble dryer, check it for any externally visible damage. Do not install or use a damaged tumble dryer. Before connecting the tumble dryer, ensure that the connection data on the data plate (fuse rating, voltage and frequency) match the mains electricity supply. If in any doubt, consult a qualified electrician.
Warnings and safety instructions Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele approved service technician, otherwise any subsequent damage will not be covered by the warranty. Faulty components must only be replaced by genuine Miele original spare parts. The manufacturer can only guarantee the safety of the appliance when Miele replacement parts are used.
Warnings and safety instructions This tumble dryer is supplied with a special lamp to cope with particular conditions (e.g. temperature, moisture, chemical resistance, abrasion resistance and vibration). This special lamp must only be used for the purpose it is intended for. It is not suitable for room lighting. Replacement lamps may only be fitted by a Miele authorised person or the Miele Service Department. This tumble dryer uses a gaseous refrigerant which is condensed by the compressor.
Warnings and safety instructions The R290 refrigerant contained in this tumble dryer is flammable and explosive. If the tumble dryer is damaged, proceed as follows: - Avoid naked flames or anything which creates a spark. - Disconnect the tumble dryer from the electrical supply. - Air the room where the tumble dryer is located. - Contact the Miele Customer Service Department. Risk of fire and explosion due to damage to the tumble dryer. The refrigerant is flammable and explosive if it leaks.
Warnings and safety instructions Warning: Do not switch the dryer off before the drying programme has finished. If this is done, the laundry must be hung up or spread out to cool it down. Fabric conditioner and similar products must be used according to the instructions on the manufacturer's packaging. Remove all items from pockets (e.g. lighters, matches). The fluff filters must be cleaned after every drying cycle. The fluff filters or the plinth filter must be thoroughly dried after cleaning.
Warnings and safety instructions To prevent the risk of fire, textiles that have not been cleaned thoroughly or are still soiled with deposits of any kind must not be dried in this tumble dryer. This applies in particular to textiles that - have not been washed. - have not been thoroughly cleaned and are still soiled with grease, oil or other deposits (such as cooking oils, cosmetics, lotions, etc.).
Warnings and safety instructions To prevent the risk of fire, these textiles must not be tumble dried: - textiles that have been cleaned using chemicals (e.g. professional dry-cleaning agents) - textiles which contain a large proportion of rubber, foam rubber or rubber-like materials. For example, products made from latex foam rubber, shower caps, waterproof textiles, rubberised articles and items of clothing and pillows with foam rubber filling.
Warnings and safety instructions Always close the door after use. This way you will avoid the danger of: - Children climbing onto or into the dryer or hiding things in it. - Pets or other small animals climbing into it. The tumble dryer must not be used without fluff filters or - with damaged fluff filters, or - with a damaged plinth filter. This would cause an excessive build-up of fluff which in turn would cause a fault.
Warnings and safety instructions Using a fragrance flacon (optional accessory) Only use genuine Miele original fragrance flacons. The fragrance flacon must be stored in its packaging so please make sure you retain this. Caution. The fragrance can leak out of the flacon. Make sure that you always keep the flacon, or the fluff filter with the flacon inserted in it, in a horizontal position when carrying and do not tip or place down on any surface.
Warnings and safety instructions Accessories Only use genuine Miele original spare parts and accessories with this appliance. If non-Miele parts are used, warranty, performance and product liability claims will be invalidated. The tumble dryer can be combined with a Miele washing machine in a washer-dryer stack. The appropriate “WTV” stacking kit (available to order) to match your tumble dryer and washing machine is required.
Operating the tumble dryer Control panel a sensor control (drying level) For selecting the drying level b PerfectDry indicator flashes after the programme has started and switches off when the running time is displayed. PerfectDry measures the residual moisture of the laundry. In programmes with selectable drying levels, PerfectDry dries the laundry precisely, although the result is also influenced by the calcium content of the water.
Operating the tumble dryer f sensor control (Start/Add laundry) The programme can be started as soon as Start/Add laundry is flashing on and off. Touching the sensor control starts the selected programme. Start/ Add laundry will light up constantly on the display. Once the programme has been started, the sensor control allows you to add laundry. g Time display After the programme has started, the programme running time will appear on the display in hours and minutes.
Before using for the first time Installation Before using the appliance for the first time, check that you have followed all the instructions under “Installation”. Read these operating instructions, paying particular attention to the information provided under “Installation”. Removing the protective foil and stickers Remove: - Any protective film from the door - Any stickers from the front and the lid Please do not remove any labels (e.g. the data plate) which are visible when you open the door.
Energy saving tips This dryer with heat-pump technology is designed for energy-saving drying cycles. However, you can save a little more energy with the following measures as the drying time is not extended unnecessarily. - If possible, make use of time-variable, low-cost electricity tariffs. Ask your energy supplier for information. Your tumble dryer's delay start function will be useful as you can select when during the next 24 hours you want drying to start automatically.
1. Notes on correct laundry care Points to note regarding washed laundry - When washing very heavily soiled items ensure that you use sufficient detergent and select a high temperature. If in doubt, wash the items several times. - Do not put soaking wet items into the tumble dryer. Make sure your laundry is thoroughly spun before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying.
1. Notes on correct laundry care Drying Care label symbols Tip: See the “Programme chart”. It lists all programmes and their maximum load. Drying - Always observe the maximum recommended load for each programme. This will mean that the energy consumption for the amount of laundry is at its most economical. Low temperature* - Down-filled garments have linings which have a tendency to shrink, depending on the quality of the item. Only use the Pre-ironing programme for these textiles.
2. Load the tumble dryer Loading the laundry Preventing damage to fabrics. Before loading the dryer, read “1. Notes on correct laundry care”. Checking the FragranceDos socket If you are not using a fragrance flacon, check that the FragranceDos socket is closed. The “Fragrance flacon” chapter describes how to use the fragrance flacon. Open the door. Remove any items that have been left inside the drum. Unfold the laundry and load loosely into the drum.
3. Select a programme and start it Switching on the tumble dryer and selecting a programme Selecting the running time for the Warm air/DryFresh programme The tumble dryer is switched on by selecting a programme and switched off by turning the programme selector to the position. The running time can be selected in 10 minute increments. You can set a running time from minutes up to hours. Turn the programme selector to a programme.
3. Select a programme and start it Selecting Gentle tumble Delicate fabrics (with the symbol on the care label, e.g. acrylic garments) are dried at a lower temperature. The programme running time is also longer. Touch the sensor control repeatedly until Gentle tumble lights up.
3. Select a programme and start it Starting the programme Start/Add laundry flashes on and off on the display. Touch the sensor control. Start/Add laundry will light up on the display. Once the programme has started, the running time will appear on the time display. Touch the Start/Add laundry sensor control to switch the indicators on again (this does not have any effect on a running programme). Adding laundry You can add laundry items after the programme has started.
4. Remove the laundry End of programme/Anti-crease action End of programme: lights up on the time display and Start/Add laundry goes out. Items left in the dryer could be damaged by overdrying when the dryer is used the next time. Always remove all items from the drum. The end of the programme is followed by the anti-crease phase, which will run for up to 2 hours. The Woollens handcare programme does not support the anti-crease function. See “Programmable functions“, “ Anti-crease”.
Delay start Selecting the Delay start function With Delay start, you can delay the start of a programme from minutes up to (hours). Delay start cannot be used with the Warm air/DryFresh programme. Firstly, select a programme with programme settings. Starting Delay start Touch the sensor control. The Delay start process starts and counts down on the time display. The drum will turn briefly every hour until the start of the programme to reduce laundry creasing.
Programme chart All weights marked with * are based on the weight of dry laundry. Cottons max. 7 kg* Use for Cotton items such as those described under Cottons Normal with normal residual moisture. Note - Items are dried to a Normal level only in this programme. - The Cottons programme is the most energy-efficient for drying cotton items with normal residual moisture levels.
Programme chart Delicates max. 2.5 kg* Normal, Hand iron Use for Delicate items with the symbol on the care label made of synthetic fibre, mixed fibre, rayon, and easy care cotton. For example, shirts, blouses, lingerie, and appliquéd garments. Tip The load should be reduced further for a particularly crease-free drying process. Woollens handcare max. 2 kg* Use for Woollen garments and fabric containing wool blends, e.g. pullovers, cardigans, tights.
Programme chart Proofing max. 2.5 kg* Use for Fabrics suitable for tumble drying, e.g. microfibre fabrics; skiwear; outdoor clothing; fine, close-weave cotton garments (poplin); and tablecloths. Note - With this programme, items can only be dried to the Normal level. - This programme includes an additional proofing fixing phase. - Only use proofing agents which are stated by the manufacturer as being “suitable for use on membrane fabrics”. These agents contain fluorochemical compounds.
Programme chart Warm air/DryFresh Note max. 7 kg* - For drying fabrics (Warm air) 1 - For freshening up fabrics (DryFresh) - Do not select the longest drying time to start with. Check the items as you are drying them to find the optimum time. Use for - Airing: multi-layered fabrics whose layers have different drying characteristics, e.g. jackets, pillows, sleeping bags and other bulky items - Drying: individual items, e.g.
Changing the programme sequence Changing a programme once it has started It is no longer possible to change the selected programme. This is to prevent the operation of the machine being tampered with. If you adjust the programme selector, the symbol will light up in the time display. The symbol goes out when you select the original programme. Cancelling the current programme Turn the programme selector to the position.
Condensed water container Emptying the condensed water container The condensed water is collected in the condensed water container. Empty the condensed water container after every drying programme. The indicator will light up if the maximum level of the condensed water container is reached. To delete the indicator: open and close the door with the dryer switched on. Damage to the door and the fascia panel when removing the condensed water container. The door and the fascia panel can sustain damage.
Fragrance flacon FragranceDos Fragrance flacons (optional accessories) can be used to give your laundry a pleasant scent. Tip: You can simply close the fragrance flacon if you want to dry textiles without adding fragrance. Risk of fire and damage to health if fragrance flacons are used incorrectly. The leaked fragrance can damage your health if it comes into contact with your body. Leaked fragrance can cause fire.
Fragrance flacon Inserting a fragrance flacon Open the door of the tumble dryer. The fragrance flacon is inserted in the upper fluff filter in the opening on the right hand side beside the grip. Markers and must line up with one another. Open the cover using the tab until the tab is at the top right hand side as shown. Turn the outer ring clockwise a little. Marker must be in position : this is the position at which you can feel a resistance.
Fragrance flacon Opening the fragrance flacon Closing the fragrance flacon Before drying, you can select the intensity of the fragrance. After drying, the fragrance flacon should be closed to prevent the fragrance from escaping needlessly. Turn the outer ring clockwise: the further you open the fragrance flacon, the more intense the fragrance. Damp laundry and longer drying durations with sufficient heat transfer are needed for the fragrance to be released into the laundry effectively.
Fragrance flacon Replacing the fragrance flacon Turn the outer ring anti-clockwise until markers a and b line up. Replace the fragrance flacon. Only store the fragrance flacon in its original packaging. Fragrance flacons are available to order from Miele or online at www.mieleshop.com. Never lay the fragrance flacon down on any surface as the fragrance will leak. - If you are keeping the fragrance flacon in its original packaging, do not store the packaging upright on its edge or upside down.
Cleaning and care Fluff filters This tumble dryer has 2 fluff filters in the loading area of the door. Both fluff filters trap fluff produced during the drying process. Pull the upper fluff filter forwards to remove it. Clean the fluff filters after each drying programme. This avoids having to extend the programme running time. Also clean the fluff filters when the indicator light comes on. To make the indicator light go out, open and close the door while the tumble dryer is switched on.
Cleaning and care Remove the fluff from the filter surface of all the fluff filters and the perforated laundry deflector. Turn the yellow dial on the lower fluff filter in the direction of the arrow (until it reaches the stop position). Push the upper fluff filter back into position until it clicks. Close the door.
Cleaning and care Use a vacuum cleaner with a long crevice nozzle attached to remove any visible fluff from the upper air flow openings. Finally, clean the fluff filters with water. Cleaning the fluff filters with water Wipe the smooth plastic surfaces of the fluff filters with a damp cloth to clean them. Flush the filters through under warm running water. Shake the fluff filters thoroughly and then dry them carefully. Ensure the filters are dry before replacing them.
Cleaning and care Cleaning the plinth filter Clean the plinth filter whenever the indicator light comes on or when the programme running time seems to be taking longer than usual. To make the indicator light go out, open and close the door while the tumble dryer is switched on. Removing the plinth filter Pull the plinth filter out by the handle. The right-hand guide pin comes out when the plinth filter is removed. The guide pin prevents the access panel from closing without the plinth filter.
Cleaning and care Cleaning the plinth filter Pull the handle out of the plinth filter. Fit the plinth filter back on the handle. Make sure it is the correct way round. Clean the plinth filter thoroughly under running water. Squeeze the plinth filter very carefully several times as you rinse it. Rinse the plinth filter until all visible residues have been removed. Use a damp cloth to remove any fluff from the handle. Damage caused by a damaged or worn plinth filter.
Cleaning and care Cleaning the plinth filter access panel Cleaning the dryer Disconnect the tumble dryer from the electrical supply. Damage due to the use of unsuitable care products. Unsuitable care products could damage plastic surfaces and other parts. Do not use any solvents, abrasive cleaners, glass cleaners, or all-purpose cleaners. Use a damp cloth to remove any fluff. Make sure that you do not damage the rubber seal when doing this. Close the heat exchanger access panel.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it. Indicator lights or information on the time display triggered when a programme is cancelled Problem Cause and remedy The indicator light comes on after a programme has been cancelled and a signal sounds.
Problem solving guide Problem Cause and remedy The indicator light comes on. and continue to flash after a programme has been cancelled despite thorough cleaning. The plinth filter looks clean after thorough cleaning. However, the programme terminates and the fault message appears again. It is likely that the filter contains residue further down inside that could not be removed. To deactivate the message, turn the programme selector to the position.
Problem solving guide Indicator lights or information on the time display Problem Cause and remedy The indicator light comes on at the end of the programme. The tumble dryer is not working correctly or economically. Possible causes could be clogging caused by fluff or detergent residue. To switch off the indicator light, open and close the door (with the tumble dryer switched on). Please see “Cleaning and care” for notes on cleaning. Clean the fluff filters.
Problem solving guide Unsatisfactory drying results Problem Cause and remedy The laundry is not suffi- The load consisted of different types of fabric. ciently dry. Finish drying using the Warm air/DryFresh programme. Select a more suitable programme next time. Useful tip: you can customise the drying levels for some programmes. See “Programmable functions”, “ Drying levels”.
Problem solving guide The drying cycle duration is very long Problem Cause and remedy The drying process goes on too long or even switches off.* The room where the tumble dryer is located is too warm. Ventilate the room thoroughly. Detergent residues, hair and fine fluff can clog the filters. Clean the fluff filters and the plinth filter. Remove visible fluff from the heat exchanger. The laundry is unevenly distributed or has rolled up. The drum is too full.
Problem solving guide Other problems Problem Cause and remedy There are humming noises The compressor is operating. These noises are quite normal and do not indicate a fault. A programme does not start No obvious cause. Connect the tumble dryer to the mains Turn on the tumble dryer Close the door Check whether the mains fuse has tripped Has there been a power cut? When power is restored any previously running programme will restart automatically.
Problem solving guide Replacing the plinth filter Deformations The heat exchanger can clog up. Replace the plinth filter immediately if you see the following signs of wear before or after cleaning (optional accessory). Poor fit Deformations indicate that the filter has become blocked and worn by continuous use. The edges of the plinth filter do not sit properly and the plinth filter is out of shape. Fluff will blow into the heat exchanger unfiltered through edges that do not sit properly.
Problem solving guide Cracks, tears, indentations Fluff will blow into the heat exchanger through cracks and tears. This will, in time, cause a blockage in the heat exchanger. White residues or residues of other colours These residues arise from laundry fibres and traces of detergent components. They can be found on the front and side edges of the plinth filter. In extreme cases, they can form stubborn crust.
Problem solving guide Reactivating the plinth filter You can reactivate one or more soiled plinth filters in a washing machine. You will then be able to use the plinth filter again. Prior to reactivation, check that the plinth filter is in good order. Check the plinth filter following the instructions provided in “Problem solving guide – Replacing the plinth filter”. Replace the plinth filter if it has worn out. Wash the plinth filter(s) separately, not with any laundry items. Do not add any detergent.
Service Contact in the event of a fault Optional accessories In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department. Optional accessories for this tumble dryer are available from Miele or from your Miele dealer. You can book a Miele Customer Service Department call-out online at www.miele.com/service. Contact information for the Miele Customer Service Department can be found at the end of this document.
*INSTALLATION* Installation Front view a Mains connection cable e Plinth filter flap b Control panel f 4 height-adjustable feet c Condensed water container g Cooling air grille d Door h Drain hose for condensed water 56
*INSTALLATION* Installation Rear view a Protruding lid for holding when moving the appliance b Drain hose for condensed water c Hook for winding up the mains connection cable during transport d Mains connection cable Transporting the tumble dryer Danger of injury to people and damage to property caused by moving the appliance incorrectly. If the tumble dryer tips up there is a danger of injury to people and damage to property. Ensure that the tumble dryer is stable during transportation.
*INSTALLATION* Installation Installation Levelling the tumble dryer Ensure that no closeable door, sliding door or oppositely hinged door is installed that could hinder opening of the tumble dryer door in any way. Risk of fire and explosion due to damage to the tumble dryer. The refrigerant is flammable and explosive. Do not make any alterations to the tumble dryer. Take measures to protect the tumble dryer against damage.
*INSTALLATION* Installation Ventilation The cool air intake at the front of the tumble dryer must not be blocked or covered. This would hinder a sufficient intake of cool air for the heat exchanger. Do not block the gap between the bottom of the tumble dryer and the floor with plinth facings, deep pile carpet etc. This would hinder a sufficient flow of air to the tumble dryer. The hot air that is blown out from the heat exchanger warms the room air. Ensure sufficient ventilation of the room: e.g.
*INSTALLATION* Installation Additional installation requirements Risk of injury from an electrical shock when the appliance lid is removed. There is a risk of electric shock because electrically charged components in the dryer are accessible with the lid removed. For safety reasons, the tumble dryer must be disconnected from the electricity supply. Building under a continuous worktop or in a cabinet Appliance defect due to a build-up of heat.
*INSTALLATION* Installation External condensed water outlet Note When drying is in progress, condensed water is pumped into the condensed water container through the drain hose which is located at the back of the dryer. The condensed water can also be externally drained away via the drain hose at the back of the dryer. This means that the condensed water container no longer has to be emptied. Drain hose length: 1.49 m Max. delivery head: 1.00 m Max. drain hose length: 4.
*INSTALLATION* Installation Arranging the drain hose Examples Damage to the drain hose Drainage into a sink or floor gully through incorrect handling. The drain hose can suffer damage and leak. Do not pull on the drain hose and do not stretch it or allow it to become kinked. Use the hose holder to secure the drain hose. There will be a small amount of residual water left in the drain hose. Have a container ready to collect this. Water damage.
*INSTALLATION* Installation Direct connection to a sink drain outlet Use the hose holder, the adapter, the hose clips and the non-return valve (available to purchase). Fit adapter 1 to the sink drain outlet using nut 2. The nut is usually fitted with a washer which must be removed. Attach the end of the hose 4 to adapter 1. Use the hose holder. Use a screwdriver to tighten hose clip 3 up close to the nut. Fit non-return valve 5 to tumble dryer drain hose 6.
*INSTALLATION* Installation Electrical connection The tumble dryer is supplied with a mains cable with moulded plug ready for connection to a suitable earthed socket. The socket must be easily accessible after the tumble dryer has been installed. If the socket is not easily accessible, ensure that a suitable means of disconnection is provided on the installation side for each pole. Risk of fire from overheating.
Technical data Height 850 mm Width 596 mm Depth 640 mm Depth with door open 1054 mm Height for building under 820 mm (+8/-2 mm) Width for building under 600 mm Depth for building under 600 mm Suitable for pushing under a worktop Yes Suitable for stacking Yes Weight Approx. 62 kg Drum volume 120 litres Load size 7.0 kg (weight of dry laundry) Capacity of condensed water container 4.8 litres Hose length 1.49 m Maximum delivery head 1.00 m Maximum drain hose length 4.
Technical data Data sheet for household tumble driers In acc. with delegated regulation (EU) No.
Technical data 3 4 5 6 If the household tumble drier is equipped with a power management system. This programme is suitable for drying normal wet cotton laundry and is the most efficient programme in terms of energy consumption for cotton. If the household tumble drier is a condenser tumble drier. For the standard cotton programme at full load.
Consumption data Load size Cottons 2 Cottons Normal 1 Final spin speed in Residual Energy Duration washing machine moisture kg rpm % kWh min 7.0 1000 60 1.70 155 3.5 1000 60 0.96 95 7.0 1200 53 1.50 140 7.0 1400 50 1.45 133 7.0 1600 44 1.30 118 Cottons Normal incl. Gentle tumble 7.0 1000 60 1.75 165 Cottons Hand iron 7.0 1000 60 1.25 120 7.0 1200 53 1.10 105 7.0 1400 50 1.00 98 7.0 1600 44 0.85 83 Minimum iron Normal 4.0 1200 40 0.
Programmable functions Programming You can use the programmable functions to alter the dryer's electronics to suit your requirements. Programming is carried out by following these steps (, , ... ) using the sensor controls. Accessing the programming level Prerequisite - Make sure that the programme selector is turned to any of the programme settings. - Make sure that the door of the tumble dryer is open.
Programmable functions Editing and saving a programmable function You can either switch a programmable function on/off or select different options. The programmable function option will appear on the time display as and a number: e.g. .
Programmable functions Drying levels You can alter the drying levels for the Cottons and Minimum iron programmes in increments. Options = Damper = Factory default = Drier = Even drier Lock code The code prevents your dryer being used without your knowledge. When the code has been activated, you have to enter the code after switching the dryer on. Otherwise the dryer cannot be operated.
Programmable functions Control field switch-off behaviour To save energy, the time display and sensor controls will go out once the programme has been running for 10 minutes. In this case, Start/Add laundry will flash on and off on the display. However, the display/sensor controls will not go off in the event of a fault. Options = Off The time display and sensor controls do not go out.
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Level 4, 141 Camberwell Road Hawthorn East, VIC 3123 Tel: 1300 464 353 Internet: www.miele.com.au China Mainland Miele Electrical Appliances Co., Ltd. 1-3 Floor, No.
TCA 220 WP en-GB M.-Nr.