User manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the tumble dryer
- Before using for the first time
- Energy saving tips
- 1. Notes on correct laundry care
- 2. Load the tumble dryer
- 3. Selecting a programme
- 4. Selecting programme settings
- 5. Starting a programme
- 6. End of programme - unload the drum
- Programme chart
- Extras
- Wash2Dry
- Favourite programmes
- Drying assistant
- Timer
- Changing the programme sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Problem solving guide
- Fault messages shown in the display when a programme is cancelled
- Messages in the display
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger
- Cleaning the fluff filter in the condensed water container
- Replacing the condensed water spray jet
- Service
- Installation
- Technical data
- Consumption data
- Settings
Settings
101
Memory
The dryer saves the settings that were
selected last for a drying programme
(drying stage and/or extra option, or
the duration for some programmes).
When the programme is chosen again,
the saved settings will appear in the
display.
Options
- Off (factory default)
- On
Volume
The volume can be changed for the
buzzer that sounds when the dryer is
switched on and at the end of the pro-
gramme. The volume of the tone that
sounds when a sensor is touched can
also be changed.
Options
- Finish tone
- Keypad tone
- Welcome tone
It can be set to one of 7 different set-
tings or switched off altogether.
Behaviour finish tone
A buzzer sounds to let you know that
it is the end of the programme. You
can decide how long the buzzer
should sound for.
Options
- Only 3 times after finish
The buzzer sounds 3times at the end
of the programme.
- Up to 1 h after finish
The buzzer sounds at the end of the
programme until the tumble dryer
switches off automatically (for a max-
imum of 1hour).
Display brightness
The brightness of the display can be
altered.
It can be set to one of 7 different set-
tings.
Factory default: a medium setting
Wash2Dry
You can deactivate the Wash2Dry
function.
Options
- On (factory default)
Wash2Dry is enabled and lights
up in the main menu.
- Off
Wash2Dry does not light up.