User manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the tumble dryer
- Before using for the first time
- Energy saving tips
- 1. Notes on correct laundry care
- 2. Load the tumble dryer
- 3. Selecting a programme
- 4. Selecting programme settings
- 5. Starting a programme
- 6. End of programme - unload the drum
- Programme chart
- Extras
- Wash2Dry
- Favourite programmes
- Drying assistant
- Timer
- Changing the programme sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Problem solving guide
- Fault messages shown in the display when a programme is cancelled
- Messages in the display
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger
- Cleaning the fluff filter in the condensed water container
- Replacing the condensed water spray jet
- Service
- Installation
- Technical data
- Consumption data
- Settings
Operating the tumble dryer
22
Examples on how to operate
the appliance
Lists
Programmes menu
11:02
0:00
0:00
0:00 0:00
h
h
h
h
Programmes
Cottons
DelicatesCottons
Minimum iron
Help
You can scroll right or left by swiping
your finger across the screen. To do
this, place your finger on the touch dis-
play and swipe it in the direction you
want.
The orange scroll bar shows that there
are further options to choose from.
Touch a programme name to select the
drying programme.
The display will change to the standard
menu for that programme.
Extras menu
11:02
OK
Extras
Gentle tumble
PowerFresh
DryFresh DryCare 40
You can scroll right or left by swiping
your finger across the screen. Place
your finger on the touch display and
swipe it in the direction you want.
The orange scroll bar shows that there
are further options to choose from.
To select an extra, touch the corres-
ponding sensor control.
The selected extra will be highlighted in
orange.
To deselect the extra, simply touch the
corresponding sensor control again.
Touch the OK sensor control to activate
the highlighted extra.