User manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the tumble dryer
- Before using for the first time
- Energy saving tips
- 1. Notes on correct laundry care
- 2. Load the tumble dryer
- 3. Selecting a programme
- 4. Selecting programme settings
- 5. Starting a programme
- 6. End of programme - unload the drum
- Programme chart
- Extras
- Wash2Dry
- Favourite programmes
- Drying assistant
- Timer
- Changing the programme sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Problem solving guide
- Fault messages shown in the display when a programme is cancelled
- Messages in the display
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger
- Cleaning the fluff filter in the condensed water container
- Replacing the condensed water spray jet
- Service
- Installation
- Technical data
- Consumption data
- Settings
Operating the tumble dryer
23
Moving programmes
You can move the programmes around
in the menu to change the sequence in
which they are displayed.
11:02
0:00
0:00
0:00 0:00
h
h
h
h
Programmes
Cottons
DelicatesCottons
Minimum iron
Help
Place your finger on the programme
you wish to move until a border is
displayed around it.
To move the programme, swipe your
finger in the required direction.
Remove your finger when the pro-
gramme reaches the new location.
The programme has moved.
Setting numerical values
You can set numerical values in some
menus.
OK
12 00
11 59
10 58
13 01
14 02
Clock display
Enter the numbers by swiping upwards
or downwards. Place your finger on the
number that you want to change and
move your finger in the direction you
want. Use the OK sensor to accept all
set figures.
Tip: Briefly touching the orange num-
bers between the two lines will bring up
the numerical keypad. Once a valid
number has been entered, the OK
sensor will be highlighted green.