User manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the tumble dryer
- Before using for the first time
- Energy saving tips
- 1. Notes on correct laundry care
- 2. Load the tumble dryer
- 3. Selecting a programme
- 4. Selecting programme settings
- 5. Starting a programme
- 6. End of programme - unload the drum
- Programme chart
- Extras
- Wash2Dry
- Favourite programmes
- Drying assistant
- Timer
- Changing the programme sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Problem solving guide
- Fault messages shown in the display when a programme is cancelled
- Messages in the display
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger
- Cleaning the fluff filter in the condensed water container
- Replacing the condensed water spray jet
- Service
- Installation
- Technical data
- Consumption data
- Settings
Energy saving tips
30
Feedback
You can view information about the en-
ergy consumption of your tumble dryer
in the pull-down menu.
The following information will appear in
the display:
- An estimate of the energy consump-
tion before the programme begins.
- The actual energy consumption dur-
ing the programme or at the end of
the programme.
11:02
2:35
Overview
Cottons
h
Timer Save
Drying level
Normal
Extras
not selected
Open the pull-down menu.
1. Estimate
The estimated energy consumption
level will be displayed as a bar chart
before the programme starts.
Energy consumption
–– ––––––––
The more bars visible, the higher the
energy consumption.
The estimate will vary depending on the
drying programme, temperature and
any extra options selected.
2. Actual consumption
The actual energy consumption and
the costs can be viewed during the
programme or at the end of the pro-
gramme.
If the energy consumption is too low,
<0.1kWh and Cost 0.00 will be dis-
played. See “Settings – Consumption”
for more detailed information on costs.
The consumption and cost will alter as
the programme progresses.
At the end of the programme, before
opening the door, you can also call up
the filter soiling level in % in the display.
Filter soiling
0% = light
50% = medium
100% = heavy
Increased soiling will cause the pro-
gramme duration to increase which in
turn will increase energy consumption.
If the door is opened or the machine
has switched off automatically at the
end of the programme, the data will
revert to the estimated consumption.
Tip: You can view the consumption
data for the last drying programme and
for total consumption (see “Settings –
Consumption”).