User manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the tumble dryer
- Before using for the first time
- Energy saving tips
- 1. Notes on correct laundry care
- 2. Load the tumble dryer
- 3. Selecting a programme
- 4. Selecting programme settings
- 5. Starting a programme
- 6. End of programme - unload the drum
- Programme chart
- Extras
- Wash2Dry
- Favourite programmes
- Drying assistant
- Timer
- Changing the programme sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Problem solving guide
- Fault messages shown in the display when a programme is cancelled
- Messages in the display
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger
- Cleaning the fluff filter in the condensed water container
- Replacing the condensed water spray jet
- Service
- Installation
- Technical data
- Consumption data
- Settings
Cleaning and care
61
Fluff filters
This tumble dryer has 2 fluff filters in the
loading area of the door. Both fluff fil-
ters trap fluff produced during the dry-
ing process.
Clean the fluff filters after each drying
programme. This prevents an exten-
sion of the programme running time.
Also clean the fluff filters when the fol-
lowing message lights up in the dis-
play: Clean the fluff and plinth filters. See
the operating instruction manual for more
information.
To clear the message, confirm with
OK.
Removing the fragrance flacon
The intensity of the fragrance will be di-
minished if the fluff filters and the plinth
filter are not cleaned.
Remove the fragrance flacon. See
“Fragrance flacon”, “Removing/repla-
cing the fragrance flacon”.
Removing visible fluff
Tip: You can also use a vacuum cleaner
so that you can remove the fluff without
touching it.
Open the door.
Pull the upper fluff filter forwards to
remove it.
Remove the fluff (see arrows).