User's Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- -
- Installation and connection
- Assembling the vacuum cleaner
- Connecting the Comfort handle
- Connecting the PowerUnit and the suction tube
- Inserting the battery
- Connecting the Electrobrush
- General battery information
- Charging the battery (without wall mounting)
- Charging the battery (with wall mounting)
- Wall mounting
- Attaching the mounting plate
- Attaching the charging cable to the wall bracket
- Connecting the accessories holder (if required)
- Connecting the wall bracket
- Battery charging state indicator (while charging)
- Battery charging state indicator (while in use)
- Using the accessories supplied
- Use
- Maintenance
- Problem solving guide
- Error messages
- Cleaning and care
- Service
- Optional accessories
- Electrical connection
- Installation and connection
22
Battery charging state indicator
(while charging)
The battery charging state is displayed
on the PowerUnit.
Charging capa-
city
Display
Approx.0–34% Bottom light
flashes slowly
Approx.35–69% Bottom light is lit
up; middle light
flashes slowly
Approx.70–90% Bottom and
middle lights are
lit up;
top light flashes
slowly
Approx.91–
100%
Bottom, middle
and top lights are
lit up
Once the battery is fully charged, the
battery charging state indicator
switches off after 10minutes to con-
serve energy.
If the battery has not been used for a
long time and has run down, it will go
into a safe mode. As a result, the bat-
tery charging state indicator will only
respond after approximately 30–
60minutes when charging in the
PowerUnit.
Battery charging state indicator
(while in use)
The battery charging state is displayed
on the PowerUnit.
Charging capa-
city
Display
Approx.100–
70%
Top, middle and
bottom lights are
lit up
Approx.69–35% Middle and bot-
tom lights are lit
up
Approx.34–11% Bottom light is lit
up
Approx.10–0% Bottom light
flashes slowly