User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Caring for the environment
- -
- Connection
- Using the supplied accessories
- Use
- Setting down and storing the vacuum cleaner
- Maintenance
- Cleaning and care
- Problem solving guide
- Service
- Optional accessories
- Purchasing accessories
- Floorheads / brushes
- TurboTeQ Turbobrush (STB 305-3)
- Parquet Twister floorbrush with swivel action (SBB 300-3)
- Parquet Twister XL floorbrush with swivel action (SBB 400-3)
- Other accessories
- Turbo Mini hand turbobrush (STB 101)
- Universal brush (SUB 20)
- Radiator brush (SHB 30)
- Mattress nozzle (SMD 10)
- Crevice nozzle, 300 mm (SFD 10)
- Crevice nozzle, 560 mm (SFD 20)
- XL upholstery nozzle (SPD 20)
- Electrical connection
11
Connection
Attaching the suction hose
Insert the hose connector into the
suction opening on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
If you want to separate the pieces
again, press the release catches at
the side of the hose connector, and
pull the suction hose out of the suc-
tion opening.
Connecting the suction hose to the
handle
Insert the suction hose into the
handle until it clicks into position.
Connecting the handle to the suction
tube
Insert the handle into the suction tube
until it clicks into position. To do this,
line up the guides on the two pieces.
To detach the handle from the suction
tube, press the release catch and pull
the handle out of the suction tube,
twisting it slightly as you do so.