User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Caring for the environment
- -
- Connection
- Using the supplied accessories
- Use
- Setting down and storing the vacuum cleaner
- Maintenance
- Cleaning and care
- Problem solving guide
- Service
- Optional accessories
- Purchasing accessories
- Floorheads / brushes
- TurboTeQ Turbobrush (STB 305-3)
- Parquet Twister floorbrush with swivel action (SBB 300-3)
- Parquet Twister XL floorbrush with swivel action (SBB 400-3)
- Other accessories
- Turbo Mini hand turbobrush (STB 101)
- Universal brush (SUB 20)
- Radiator brush (SHB 30)
- Mattress nozzle (SMD 10)
- Crevice nozzle, 300 mm (SFD 10)
- Crevice nozzle, 560 mm (SFD 20)
- XL upholstery nozzle (SPD 20)
- Electrical connection
21
Clean the pleated side of the fine
dust filter with the long brushes on
the cleaning tool.
Risk of damage caused by incor-
rect cleaning.
The fine dust filter and the filter mat
can become damaged and be less
effective as a result.
Do not use pointed or sharp-edged
objects to clean the fine dust filter
and the filter mat.
Clean the pleated side of the fine dust
filter and the filter mat with water once a
month.
Rinse the pleated side of the fine dust
filter under cold running water.
Rinse the filter mat under cold run-
ning water.
Risk of damage caused by incor-
rect cleaning.
The fine dust filter and the filter mat
can become damaged and be less
effective as a result.
Do not use washing-up liquid or
cleaning brushes when cleaning the
pleated side of the fine dust filter and
the filter mat with water. After clean-
ing, allow the fine dust filter to dry in
a well ventilated room for a minimum
of 24hours with the pleated side fa-
cing up. The filter mat must also be
left to dry for at least 24 hours.