User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Caring for the environment
- -
- Connection
- Using the supplied accessories
- Use
- Setting down and storing the vacuum cleaner
- Maintenance
- Cleaning and care
- Problem solving guide
- Service
- Optional accessories
- Purchasing accessories
- Floorheads / brushes
- TurboTeQ Turbobrush (STB 305-3)
- Parquet Twister floorbrush with swivel action (SBB 300-3)
- Parquet Twister XL floorbrush with swivel action (SBB 400-3)
- Other accessories
- Turbo Mini hand turbobrush (STB 101)
- Universal brush (SUB 20)
- Radiator brush (SHB 30)
- Mattress nozzle (SMD 10)
- Crevice nozzle, 300 mm (SFD 10)
- Crevice nozzle, 560 mm (SFD 20)
- XL upholstery nozzle (SPD 20)
- Electrical connection
23
a Lift up the dust container handle and
hold it in this position.
b Press the release catch on the side
flap. There is a cut-out on the oppos-
ite side to make it easier to remove
the side flap.
c Remove the side flap.
Once the side flap has been removed,
the pre-filter inside can be accessed.
Clean the pre-filter and the side walls
on the inside using the cleaning tool.
Risk of damage caused by incor-
rect cleaning.
The pre-filter can become damaged
and be less effective as a result.
Do not use pointed or sharp-edged
objects to clean the pre-filter.
Clean the interior side walls using a
slightly damp cloth and mild wash-
ing-up liquid if necessary.
Dry the interior side walls carefully.
The filter frame is located on the rear
side of the removed side flap at the bot-
tom.
Press the two release catches on the
side of the filter frame and remove the
filter.
Clean the filter using the cleaning
tool.
Risk of damage caused by incor-
rect cleaning.
The filter can become damaged and
be less effective as a result.
Do not use pointed or sharp-edged
objects to clean the filter.