User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Caring for the environment
- -
- Connection
- Using the supplied accessories
- Use
- Setting down and storing the vacuum cleaner
- Maintenance
- Cleaning and care
- Problem solving guide
- Service
- Optional accessories
- Purchasing accessories
- Floorheads / brushes
- TurboTeQ Turbobrush (STB 305-3)
- Parquet Twister floorbrush with swivel action (SBB 300-3)
- Parquet Twister XL floorbrush with swivel action (SBB 400-3)
- Other accessories
- Turbo Mini hand turbobrush (STB 101)
- Universal brush (SUB 20)
- Radiator brush (SHB 30)
- Mattress nozzle (SMD 10)
- Crevice nozzle, 300 mm (SFD 10)
- Crevice nozzle, 560 mm (SFD 20)
- XL upholstery nozzle (SPD 20)
- Electrical connection
25
Replacing the exhaust filter
Press the release catch on the ex-
haust filter compartment flap and re-
move the flap.
Pull the exhaust filter removal tab up-
wards and pull the exhaust filter for-
wards to remove it.
a Place the insertion aids that are loc-
ated on both sides of the new ex-
haust filter into the guides on the ex-
haust filter compartment.
b Push the exhaust filter back and up.
c Press the exhaust filter firmly into po-
sition until it clicks into place.
If you have fitted your vacuum
cleaner with a HEPAAirClean exhaust
filter, press the timestrip® filter
change indicator.